EDS1232AATA-60TI View Datasheet(PDF) - Elpida Memory, Inc

Part Name

Description

View to exact match

EDS1232AATA-60TI

128M bits SDRAM WTR (Wide Temperature Range)

Elpida Memory, Inc 

EDS1232AATA-TI

Auto Precharge

Read with auto-precharge

In this operation, since precharge is automatically performed after completing a read operation, a precharge

command need not be executed after each read operation. The command executed for the same bank after the

execution of this command must be the bank active (ACT) command. In addition, an interval defined by lAPR is

required before execution of the next command.

[Clock cycle time]

/CAS latency

Precharge start cycle

3

2 cycle before the final data is output

2

1 cycle before the final data is output

CLK

CL=2 Command

DQ

ACT

CL=3 Command

DQ

ACT

READA

lRAS

READA

lRAS

ACT

out0

out1

out2

out3

lAPR

ACT

out0

out1

out2

out3

Note: Internal auto-precharge starts at the timing indicated by " ".

And an interval of tRAS (lRAS) is required between previous active (ACT) command and internal precharge " ".

lAPR

Burst Read (BL = 4)

Write with auto-precharge

In this operation, since precharge is automatically performed after completing a burst write or single write operation,

a precharge command need not be executed after each write operation. The command executed for the same bank

after the execution of this command must be the bank active (ACT) command. In addition, an interval of lDAL is

required between the final valid data input and input of next command.

CLK

Command ACT

WRITA

lRAS

ACT

DQ

in0 in1 in2 in3

lDAL

Note: Internal auto-precharge starts at the timing indicated by " ".

and an interval of tRAS (lRAS) is required between previous active (ACT) command

and internal precharge " ".

Burst Write (BL = 4)

Data Sheet E0305E30 (Ver. 3.0)

29

Share Link: