CYIL2SM1300AA(2009) View Datasheet(PDF) - Cypress Semiconductor
Part Name
Description
View to exact match
CYIL2SM1300AA Datasheet PDF : 41 Pages
| |||
CYIL2SM1300AA
LUPA 1300-2: High Speed CMOS
Image Sensor
Features
■ 1280 x 1024 Active Pixels
■ 14 µm X 14 µm Square Pixels
■ 1” Optical Format
■ Monochrome or Color Digital Output
■ 500 fps Frame Rate
■ On-Chip 10-Bit ADCs
■ 12 LVDS Serial Outputs
■ Random Programmable ROI Readout
■ Pipelined and Triggered Snapshot Shutter
■ On-Chip Column FPN Correction
■ Serial to Parallel Interface (SPI)
■ Limited Supplies: Nominal 2.5V and 3.3V
■ 0°C to 70°C Operational Temperature Range
■ 168-Pin µPGA Package
■ Power Dissipation: 1350 mW
Applications
■ High Speed Machine Vision
■ Motion Analysis
■ Intelligent Traffic System
■ Medical Imaging
■ Industrial Imaging
Description
The LUPA 1300-2 is an integrated SXGA high speed, high
sensi¬tivity CMOS image sensor. This sensor targets high speed
machine vision and industrial monitoring applications. The LUPA
1300-2 sensor runs at 500 fps and has triggered and pipelined
shutter modes. It packs 24 parallel 10-bit A/D converters with an
aggregate conversion rate of 740 MSPS. On-chip digital column
FPN correction enables the sensor to output ready to use image
data for most applications. To enable simple and reliable system
integration, the 12 channels, 1 sync channel, 8 Gbps, and LVDS
serial link protocol supports skew correction and serial link
integrity monitoring.
The peak responsivity of the 14 µm x 14 µm 6T pixel is 7350
V.m2/W.s. Dynamic range is measured at 57 dB. In full frame
video mode, the sensor consumes 1350 mW from the 2.5V
power supply. The sensors integrate A/D conversion, on-chip
timing for a wide range of operating modes, and has an LVDS
interface for easy system integration.
By removing the visually disturbing column patterned noise, this
sensor enables building a camera without any offline correction
or the need for memory. In addition, the on-chip column FPN
correction is more reliable than an offline correction, because it
compensates for supply and temperature variations. The sensor
requires one master clock for operations up to 500 fps.
The LUPA 1300-2 is housed in a 168 pin µPGA package and is
available in a monochrome version and Bayer (RGB) patterned
color filter array. The monochrome version is available without
glass. Contact your local Cypress office.
Figure 1. LUPA 1300-2 Die Photo
Table 1. Marketing Part Number
Marketing Part Number
(ES Samples)
Mono/Color
CYIL2SM1300AA-GZDC mono with glass
CYIL2SM1300AA-GWCES mono without glass[1]
CYIL2SC1300AA-GZDC
color with glass
Package
168 pin
ceramic
µPGA
Note
1. Contact your local sales office for the windowless option.
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 001-24599 Rev. *B
• San Jose, CA 95134-1709 • 408-943-2600
Revised July 24, 2009
[+] Feedback
Share Link: 