NOIL1SM4000A(2013) View Datasheet(PDF) - ON Semiconductor
Part Name
Description
View to exact match
NOIL1SM4000A Datasheet PDF : 30 Pages
| |||
NOIL1SM4000A
SPECIFICATIONS
Key Specifications
GENERAL SPECIFICATIONS
Parameter
Specifications
Active pixels
2048 x 2048
Pixel size
12 mm x 12 mm
Optical format
24.6 mm x 24.6 mm
Pixel type
Global shutter pixel architecture
Shutter type
Pipelined global shutter
Master clock
33 MHz
Windowing (ROI)
Randomly programmable ROI
Readout
Windowed and subsampled readout
possible
Power dissipation
200 mW
Package type
127 PGA
ELECTRO−OPTICAL SPECIFICATIONS
Parameter
Typical Specifications
Frame rate
Conversion gain
Responsivity at 550 nm
15 fps at full resolution
11.5 mV/e-
1550 (V/s)/(W/m2)
Fill factor (FF)
37.5%
Parasitic light sensitivity
Full well charge
< 1/7600 at 550 nm
95700 e-
Quantum efficiency (QE) 36% (QE x FF)
Fixed pattern noise (FPN) 16 mV
Photo response
nonuniformity (PRNU)
3% of signal
Dynamic range
66 dB (single slope),
90 dB (multiple slope)
Dark signal
22 mV/s at +20°C with 50 ms
integration time
Dark signal doubling
temperature
8.65°C
Absolute Maximum Ratings
ABSOLUTE MAXIMUM RATINGS (Note 1)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Symbol
Description
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ABS (2.5 V supply group)
ABS rating for 2.5 V supply group
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ABS (3.3 V supply group)
ABS rating for 3.3 V supply group
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Electrostatic discharge (ESD)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ (Note 3)
Human body model (HBM)
Charged device model (CDM)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Latch−up
Latch−up rating
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ TS (Note 3)
ABS Storage temperature range
ABS Storage humidity range at 85°C
Min
−0.5
−0.5
−40
Max
2.9
4.0
(Note 4)
(Note 5)
+150
85
Units
V
V
°C
%RH
RECOMMENDED OPERATING RATINGS
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ TJ (Note 2)
Humidity (Relative)
0
60
°C
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ 1. Absolute maximum ratings are limits beyond which damage may occur. Exceeding the maximum ratings may impair the useful life of the
device.
2. Operating ratings are conditions at which operation of the device is intended to be functional.
3. ON Semiconductor recommends that customers become familiar with, and follow the procedures in, JEDEC Standard JESD625−A. Refer
to Application Note AN52561.
4. The LUPA4000 complies with JESD22−A114 HBM Class 0 and JESD22−C101 Class I. It is recommended that extreme care be taken while
handling these devices to avoid damages due to ESD event.
5. The LUPA4000 does not have latch−up protection.
http://onsemi.com
3
Share Link: 