NT35510 View Datasheet(PDF) - Novatek Microelectronics
Part Name
Description
View to exact match
NT35510 Datasheet PDF : 211 Pages
| |||
PRELIMINARY
NT35510
4 PIN DESCRIPTION
4.1 Power Supply Pins
Symbol
Name
Description
VDDB
VDDA
VDDR
VDD_DET
VDDAM
VDDI
DVDD
DIOPWR
MVDDA
MVDDL
VSSB
VSSA
VSSR
DC/DC Power
Analog Power
Regulator Power
Detection Power
MIPI Power
I/O Power
Digital Voltage
Dual I/O Voltage
MIPI/MDDI
Voltage
MIPI Voltage
DC/DC GND
Analog GND
Regulator GND
Power supply for DC/DC converter
VDDB, VDDA and VDDR should be the same input voltage level
Power supply for analog system
VDDB, VDDA and VDDR should be the same input voltage level
Power supply for regulator system
VDDB, VDDA and VDDR should be the same input voltage level
Connect to VDDB/VDDA/VDDR for detection.
Power supply for MIPI/MDDI analog regulator system
Power supply for interface system except MIPI/MDDI interface
Regulator output for logic system power (1.55V typical)
Connect a capacitor for stabilization.
Regulator output for dual I/O voltage system (1.2V/1.8V typical).
Connect a capacitor for stabilization.
Regulator output for internal MIPI/MDDI analog system (1.5V typical)
Connect a capacitor for stabilization.
If not use MIPI/MDDI interface, please open this pin.
Regulator output for internal MIPI low power system (1.2V typical)
Connect a capacitor for stabilization.
If not use MIPI interface, please open this pin
System ground for DC/DC converter
System ground for analog system
System ground for regulator system
VSSAM
VSSI
DVSS
AVSS
MTP_PWR
MIPI GND
I/O GND
Digital GND
Source OP GND
MTP Power
System ground for internal MIPI/MDDI analog system
System ground for interface system except MIPI/MDDI interface
System ground for internal digital system
System ground for source OP system.
MTP programming power supply pin (7.5 to 8.0V and 7.75V typical)
Must be left open or connected to DVSS in normal condition.
11/8/2010
12
Version 0.00
With respect to the information represented in this document, Novatek makes no warranty, expressed or implied, including the warranties of merchantability,
fitness for a particular purpose, non-infringement, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any such
information.
Share Link: 