CYIL2SM1300-EVAL View Datasheet(PDF) - ON Semiconductor

Part Name

Description

View to exact match

CYIL2SM1300-EVAL

LUPA 1300-2: High Speed CMOS Image Sensor

ON Semiconductor 

CYIL2SM1300AA

Overview

This data sheet describes the interface of the LUPA1300-2

image sensor. The SXGA resolution CMOS active pixel sensor

features synchronous shutter and a maximal frame rate of

500 fps in full resolution. The readout speed is boosted by sub

sampling and the windowed region of interest (ROI) readout.

FPN correction cannot be used in conjunction with sub-sampling

and windowed region of interest readout. High dynamic range

scenes can be captured using the double and multiple slope

functionality. User programmable row and column start and stop

positions enables windowing. Sub sampling reduces resolution

while maintaining the constant field of view and an increased

frame rate.

The LUPA1300-2 sensor has 12 LVDS high speed outputs that

transfer image data over longer distances. This simplifies the

surrounding system. The LVDS interface can receive high speed

and wide bandwidth data signals and maintain low noise and

distortion. A special training mode enables the receiving system

to synchronize the coming data stream when switching to

master, slave, or triggered mode. The image sensor also

integrates a programmable offset and gain amplifier for each

channel.

A 10-bit ADC converts the analog data to a 10-bit digital word

stream. The sensor uses a 3-wire Serial-Parallel Interface (SPI).

It requires only one master clock for operation up to 500 fps.

The sensor is available in a monochrome version or Bayer (RGB)

patterned color filter array. It is placed in a 168-pin ceramic µPGA

package.

Specifications

Table 1. General Specifications

Parameter

Active Pixels

Pixel Size

Pixel Type

Pixel Rate

Specifications

1280 (H) x 1024 (V)

14 µm x 14 µm

6T pixel architecture

630 Mbps per channel (12 serial

LVDS outputs)

Shutter Type

Frame Rate

Master Clock

Windowing (ROI)

Read Out

ADC Resolution

Sensitivity

Extended Dynamic

Range

Pipelined and Triggered Global

Shutter

500 fps at 1.3 Mpixel (boosted by

subsampling and windowing)

315 MHz for 500 fps

Randomly programmable ROI read

out up to four multiple windows

Windowed, flipped, mirrored, and

subsampled read out possible

10-bit, on-chip

10.16 V/lux.s at 550 nm

Multiple slope (up to 90 dB optical

dynamic range)

Table 2. Electro Optical Specifications

Parameter

Conversion gain

Full well charge

Responsivity

Fill factor

Parasitic light sensitivity

Dark noise

QE x FF

FPN

PRNU

Dark signal

Power dissipation

34µV/e-

30000e-

Value

7350 V.m2/W.s at 680 nm

40%

< 1/10000

37e-

35% at 680 nm

2% rms of the output swing

<1% rms of the output signal

170 mV/s at 30°C

1350 mW

Document Number: 001-24599 Rev. *C

Page 2 of 41

[+] Feedback

Share Link: