PRELIMINARY
NT35510
RDCCS: Read Continue Checksum (AF00h)
Inst / Para
RDCCS
R/W
Read
Address
Parameter
MIPI Others D[15:8] (Non-MIPI) D7 D6 D5 D4 D3 D2 D1 D0
AFh AF00h
00h
CCS7 CCS6 CCS5 CCS4 CCS3 CCS2 CCS1 CCS0
NOTE: “-“ Don’t care
This command returns the continue checksum what has been calculated continuously after the first
Description checksum has calculated from “User Command Set” area registers and the frame memory after the write
access to those registers and/or frame memory has been done.
Restriction
It will be necessary to wait 300ms after there is the last write access on “User Command Set” area
registers before there can read this checksum value in the first time.
Register
Availability
Status
Normal Mode On, Idle Mode Off, Sleep Out
Normal Mode On, Idle Mode On, Sleep Out
Partial Mode On, Idle Mode Off, Sleep Out
Partial Mode On, Idle Mode On, Sleep Out
Sleep In
Availability
Yes
Yes
Yes
Yes
Yes
Default
Flow Chart
Status
Power On Sequence
S/W Reset
H/W Reset
RDCCS(AFh)
Send Parameter
CCS[7:0]
Default Value
00h
00h
00h
Legend
Host
Driver
Command
Parameter
Display
Action
Mode
Sequential
transfer
11/8/2010
202
Version 0.00
With respect to the information represented in this document, Novatek makes no warranty, expressed or implied, including the warranties of merchantability,
fitness for a particular purpose, non-infringement, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any such
information.