PRELIMINARY
NT35510
RDFCS: Read First Checksum (AA00h)
Inst / Para
RDFCS
R/W
Read
Address
Parameter
MIPI Others D[15:8] (Non-MIPI) D7 D6 D5 D4 D3 D2 D1 D0
AAh AA00h
00h
FCS7 FCS6 FCS5 FCS4 FCS3 FCS2 FCS1 FCS0
NOTE: “-“ Don’t care
This command returns the first checksum what has been calculated from “User Command Set” area
Description registers (not include “Manufacture Command Set) and the frame memory after the write access to those
registers and/or frame memory has been done.
Restriction
It will be necessary to wait 150ms after there is the last write access on “User Command Set” area
registers before there can read this checksum value.
Register
Availability
Status
Normal Mode On, Idle Mode Off, Sleep Out
Normal Mode On, Idle Mode On, Sleep Out
Partial Mode On, Idle Mode Off, Sleep Out
Partial Mode On, Idle Mode On, Sleep Out
Sleep In
Availability
Yes
Yes
Yes
Yes
Yes
Default
Flow Chart
Status
Power On Sequence
S/W Reset
H/W Reset
RDFCS(AAh)
Send Parameter
FCS[7:0]
Default Value
00h
00h
00h
Legend
Host
Driver
Command
Parameter
Display
Action
Mode
Sequential
transfer
11/8/2010
201
Version 0.00
With respect to the information represented in this document, Novatek makes no warranty, expressed or implied, including the warranties of merchantability,
fitness for a particular purpose, non-infringement, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any such
information.