JANS1N5809(Rev_1) View Datasheet(PDF) - Microsemi Corporation

Part Name

Description

View to exact match

JANS1N5809
(Rev.:Rev_1)

VOIDLESS - HERMETICALLY- SEALED ULTRAFAST RECOVERY GLASS RECTIFIERS

Microsemi Corporation 

6 Lake Street, Lawrence, MA 01841

1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803

Website: http://www.microsemi.com

TECHNICAL DATA SHEET

Gort Road Bussiness Park, Ennis, Co. Clare, Ireland.

Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298

PACKAGE DIMENSIONS

Dimensions

Ltr

1N5802US,

1N5804US, 1N5806US

1N5807US,

1N5809US, 1N5811US

Notes

Inches

Millimeters

Inches

Millimeters

Min Max Min Max Min Max Min Max

BD .091 .103 2.31 2.62 .137 .148 3.84 3.76

BL .168 .200 4.27 5.08 .200 .225 5.08 5.72

ECT .019 .028 0.48 0.71 .019 .028 0.48 0.71

S .003

0.08

.003

0.08

PAD LAYOUT

INCHES

mm

A

0.288

7.32

B

0.070

1.78

C

0.155

3.94

Note: If mounting requires

adhesive separate from the

solder, an additional 0.080 inch

diameter contact may be placed

in the center between the pads as

an optional spot for cement.

NOTE 1:

6. Dimensions are in inches.

7. Millimeters are given for general information only.

8. Dimensions are pre-solder dip.

9. Minimum clearance of glass body to mounting surface on all orientations.

10. Cathode marking to be either in color band, three dots spaced equally, or a color dot on the face of the end tab.

11. Color dots will be .020 inch (0.51 mm) diameter minimum and those on the face of the end tab shall not lie

within .020 inch (0.51 mm) of the mounting surface.

12. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology.

NOTE 2: This Package Outline has also previously been identified as “D-5B”

T4-LDS-0168 Rev. 1 (101025)

Page 7 of 7

Share Link: