General Description
   The S25FL116K of the FL1-K family non-volatile flash memory devices connect to a host system via a Serial Peripheral Interface (SPI). Traditional SPI single bit serial input and output (SIngle I/O or SIO) is supported as well as optional two bit (Dual I/O or DIO) and four bit (Quad I/O or QIO) serial protocols. This multiple width interface is called SPI Multi-I/O or MIO.

FEATUREs
◾ Serial Peripheral Interface (SPI)
   – SPI Clock polarity and phase modes 0 and 3
   – Command subset and footprint compatible with S25FL016K
◾ Read
   – Normal Read (Serial): 50 MHz clock rate
   – Fast Read (Serial): 108 MHz clock rate
   – Dual / Quad (Multi-I/O) Read 108 MHz clock rate
   – 54 MB/s maximum continuous data transfer rate
   – Efficient eXecute-In-Place (XIP)
      – Continuous and wrapped read modes
   – Serial Flash Discoverable Parameters (SFDP)
◾ Program
   – Serial-input Page Program (up to 256 bytes)
   – Program Suspend and Resume
◾ Erase
   – Uniform sector erase (4 kB)
   – Uniform block erase (64 kB)
   – Bulk erase
   – Erase Suspend and Resume
◾ Cycling Endurance
   – 100K Program-Erase cycles on any sector, minimum
◾ Data Retention
   – 20-year data retention, typical
◾ Security
   – Three 256-byte Security Registers with OTP protection
   – Low supply voltage protection of the entire memory
   – Top / Bottom relative Block Protection Range, 4 kB to all of memory
   – 8-Byte Unique ID for each device
   – Non-volatile Status Register bits control protection modes
      – Software command protection
      – Hardware input signal protection
      – Lock-Down until power cycle protection
      – OTP protection of security registers
◾ 90 nm Floating Gate Technology
◾ Single Supply Voltage: 2.7V to 3.6V
◾ Temperature Ranges
   – Industrial (–40°C to +85°C)
   – Automotive (–40°C to +105°C)
◾ Package Options
   – S25FL116K
      – 8-lead SOIC (150 mil) - SOA008
      – 8-lead SOIC (208 mil) - SOC008
      – 8-contact WSON 5x6 - WND008
      – 24-ball BGA 6 mm x 8 mm - FAB024 and FAC024
      – KGD / KGW