零件编号
NX3L1T53
Other PDF
PDF
page
24 Pages
File Size
325.7 kB
生产厂家
NXP Semiconductors.
NX3L1T53 数据手册 ( 数据表 ) - NXP Semiconductors.
NXP Semiconductors.
General description
The NX3L1T53 is a low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), two independent inputs/outputs (Y0 and Y1), a common input/output (Z) and an active LOW enable input (E). When pin E is HIGH, the switch is turned off.
Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.3 V applications without significant increase in supply current ICC.
Features and benefits
◾ Wide supply voltage range from 1.4 V to 4.3 V
◾ Very low ON resistance (peak):
✦ 1.6 Ω (typical) at VCC = 1.4 V
✦ 1.0 Ω (typical) at VCC = 1.65 V
✦ 0.55 Ω (typical) at VCC = 2.3 V
✦ 0.50 Ω (typical) at VCC = 2.7 V
✦ 0.50 Ω (typical) at VCC = 4.3 V
◾ Break-before-make switching
◾ High noise immunity
◾ ESD protection:
✦ HBM JESD22-A114F Class 3A exceeds 7500 V
✦ MM JESD22-A115-A exceeds 200 V
✦ CDM AEC-Q100-011 revision B exceeds 1000 V
✦ IEC61000-4-2 contact discharge exceeds 8000 V for switch ports
◾ CMOS low-power consumption
◾ Latch-up performance exceeds 100 mA per JESD 78 Class II Level A
◾ 1.8 V control logic at VCC = 3.6 V
◾ Control input accepts voltages above supply voltage
◾ Very low supply current, even when input is below VCC
◾ High current handling capability (350 mA continuous current under 3.3 V supply)
◾ Specified from -40 °C to +85 °C and from -40 °C to +125 °C
Applications
◾ Cell phone
◾ PDA
◾ Portable media player
Share Link: 