1500 WATT LOW CLAMPING FACT OF TRANSIENT VOLTAGE SUPPRESSOR

DESCRIPTION
This Transient Voltage Suppressor (TVS) series for 1N6373 thru 1N6389 are JEDEC registered selections for both unidirectional and bidirectional devices. The 1N6373 thru 1N6381 are unidirectional and the 1N6382 thru 1N6389 are bi-directional where they all provide a very low specified clamping factor for minimal clamping voltages (VC) above their respective breakdown voltages (VBR) as specified herein. They are most often used in protecting sensitive components from inductive switching transients or induced secondary lightning effects as found in lower surge levels of IEC61000-4-5 . They are also very successful in protecting airborne avionics and electrical systems. Since their response time is virtually instantaneous, they can also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4.

FEATURES
• Unidirectional and bidirectional TVS series for thru-hole mounting
• Suppresses transients up to 1500 watts @ 10/1000 µs
• tclamping (0 volts to V(BR) min):
   Unidirectional – Less than 100 pico seconds.
   Bidirectional – Less than 5 nano seconds.
• Working voltage (VWM) range 5 V to 45 V
• Low clamping factor (ratio of actual VC/VBR): 1.33 @ full
   rated power and 1.20 @ 50% rated power
• Economical plastic encapsulated TVS for thru-hole mount
• Options for screening in accordance with MIL-PRF-19500
   for JAN, JANTX, JANTXV, and JANS are also available
   by adding MQ, MX, MV, MSP prefixes respectively to
   part numbers, e.g. MX1N6373, etc.
• Surface mount equivalent packages also available as
   SMCJ6373 – SMCJ6389 (consult factory for other
   surface mount options)
• Metal package axial-leaded equivalents available in the
   1N6373 – 1N6389 series (see separate data sheet)
  
APPLICATIONS / BENEFITS
• Designed to protect Bipolar and MOS Microprocessor based systems.
• Protection from switching transients and induced RF
• ESD & EFT protection per IEC 61000-4-2 and -4-4
• Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance:
   Class 1, 2 & 3 1N6356 to 1N6372
   Class 4: 1N6356 to 1N6362
• Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance:
   Class 1 & 2: 1N6356 to 1N6372
   Class 3: 1N6356 to 1N6362
   Class 4: 1N6356 to 1N6358
• Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance:
   Class 2: 1N6356 to 1N6361
   Class 3: 1N6356 to 1N6358