General Description
The MAX5069 is a high-frequency, current-mode, pulse-width modulation (PWM) controller (with dual MOSFET drivers) that integrates all the building blocks necessary for implementing AC-DC or DC-DC fixed-frequency power supplies. Isolated or nonisolated push-pull and half/full-bridge power supplies are easily constructed using either primary- or secondary-side regulation. Current-mode control with leading-edge blanking simplifies control-loop design and a programmable internal slope-compensation circuit stabilizes the current loop when operating at duty cycles above 50%.
An input undervoltage lockout (UVLO) programs the input-supply startup voltage and ensures proper operation during brownout conditions.

FEATUREs
♦ Current-Mode Control with 47µA (typ) Startup Current
♦ Oscillator Frequency Programmable to 2.5MHz
♦ Resistor-Programmable ±4.5% Accurate Switching Frequency
♦ Dual Gate-Drive Output for Half/Full-Bridge or Push-Pull Applications
♦ Rectified 85VAC to 265VAC, or 36VDC to 72VDC Input (MAX5069A/B)
♦ Input Directly Driven from 10.8V to 24V (MAX5069C/D)
♦ Programmable Dead Time and Slope Compensation
♦ Programmable Startup Voltage (UVLO)
♦ Programmable UVLO Hysteresis (MAX5069B/C)
♦ Frequency Synchronization Input (MAX5069A/D)
♦ -40°C to +125°C Automotive Temperature Range
♦ 16-Pin Thermally Enhanced TSSOP-EP Package

APPLICATIONs
   Universal-Input AC Power Supplies
   Isolated Telecom Power Supplies
   Networking System Power Supplies
   Server Power Supplies
   Industrial Power Conversion