General Description
The LM358 consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.
Application areas include transducer amplifiers, dc gain blocks and all the conventional op amp circuits which now can be more easily implemented in single power supply sys tems. For example, the LM358 can be directly operated off of the standard +5V power supply voltage which is used in digital systems and will easily provide the required interface electronics without requiring the additional ±15V power supplies.

FEATUREs
■ Internally frequency compensated for unity gain
■ Large dc voltage gain: 100 dB
■ Wide bandwidth (unity gain): 1 MHz (temperature compensated)
■ Wide power supply range:
   — Single supply: 3V to 32V
   — or dual supplies: ±1.5V to ±16V
■ Very low supply current drain (500 µA)— essentially independent of supply voltage
■ Low input offset voltage: 2 mV
■ Input common-mode voltage range includes ground
■ Differential input voltage range equal to the power supply voltage
■ Large output voltage swing: 0V to V+− 1.5V

Advantages
■ Two internally compensated op amps
■ Eliminates need for dual supplies
■ Allows direct sensing near GND and VOUT also goes to GND
■ Compatible with all forms of logic
■ Power drain suitable for battery operation
■ Pin-out same as LM1558/LM1458 dual op amp