CAT5221WI-00 数据手册 ( 数据表 ) - Catalyst Semiconductor => Onsemi
生产厂家

Catalyst Semiconductor => Onsemi
DESCRIPTION
The CAT5221 is two Digitally Programmable Potentiometers (DPPs™) integrated with control logic and 16 bytes of NVRAM memory. Each DPP consists of a series of 63 resistive elements connected between two externally accessible end points. The tap points between each resistive element are connected to the wiper outputs with CMOS switches.
FEATURES
■ Two linear-taper digitally programmable potentiometers
■ 64 resistor taps per potentiometer
■ End to end resistance 2.5kΩ, 10kΩ, 50kΩ or 100kΩ
■ Potentiometer control and memory access via I2C interface
■ Low wiper resistance, typically 80Ω
■ Nonvolatile memory storage for up to four wiper settings for each potentiometer
■ Automatic recall of saved wiper settings at power up
■ 2.5 to 6.0 volt operation
■ Standby current less than 1µA
■ 1,000,000 nonvolatile WRITE cycles
■ 100 year nonvolatile memory data retention
■ 20-lead SOIC and TSSOP packages
■ Industrial temperature range
Page Link's:
1
2
3
4
5
6
7
8
9
10
More Pages
Dual Digitally Programmable Potentiometer (DPP™) with 64 Taps and I2C Interface
ON Semiconductor
Dual Digital Potentiometer (POT) with 64 Taps and I2C Interface ( Rev : 2013 )
ON Semiconductor
16 Volt Digitally Programmable Potentiometer (DPP) with 128 Taps and I2C Interface ( Rev : 2010 )
ON Semiconductor
Quad Digitally Programmable Potentiometer (DPP™) with 64 Taps and I²C Interface
ON Semiconductor
16 Volt Digitally Programmable Potentiometer (DPP™) with 128 Taps and I2C Interface
Catalyst Semiconductor => Onsemi
Dual Digitally Programmable Potentiometer (DPP™) with 256 Taps and Microwire Interface ( Rev : 2007 )
Catalyst Semiconductor => Onsemi
Dual Digitally Programmable Potentiometer (DPP™) with 256 Taps and Microwire Interface
ON Semiconductor
Dual Digitally Programmable Potentiometer (DPP™) with 256 Taps and SPI Interface
Catalyst Semiconductor => Onsemi
Quad Digitally Programmable Potentiometer (DPP™) with 256 Taps and SPI Interface
ON Semiconductor
Dual Digitally Programmable Potentiometers (DPP) with 256 Taps & I2C Compatible Interface ( Rev : 2009 )
ON Semiconductor