DESCRIPTION
This surface mountable 1.5 W Zener diode series in the JEDEC DO-213AB package is similar in electrical features to the JEDEC registered 1N5913B thru 1N5956B axial-leaded package for 3.3 to 200 V. It is an ideal selection for applications of high density and low parasitic requirements. Due to its glass hermetic qualities and metallurgically enhanced internal contacts, it may also be used for high reliability applications when required by a source control drawing (SCD) or screening in accordance with MIL-PRF-19500 as described in Features below. Zener voltage tolerance options are identified by part number suffix including tight-tolerance. A variety of other Zener product offerings and packages are available by Microsemi to meet higher or lower power and test current applications.

FEATURES
• Electrically similar to the JEDEC registered 1N5913B
   thru 1N5956B zener series
• Zener voltages available 3.3V to 200V
• Options for screening in accordance with MIL-PRF-
   19500 for JAN, JANTX, JANTXV, and JANS are
   available by adding MQ, MX, MV, or MSP prefixes
   respectively to part numbers, e.g. MX1N5913BUR-1,
   MV1N5923CUR-1, MSP1N5952DUR-1, etc.
• Surface mount equivalents also available as
   SMBJ5913B to SMBJ5956B, SMBG5913B to
   SMBG5956B, SMAJ5913B to SMAJ5956B, or as
   1PMT5913B to 1PMT5956B (see separate data
   sheets)
• Plastic body axial-leaded Zener equivalents are also
   available as 1N5913BP to 1N5956BP (see separate
   data sheet)

APPLICATIONS / BENEFITS
• Regulates voltage over a broad operating current
   and temperature range
• Wide selection from 3.3 to 200 V
• Leadless package for surface mounting
• Ideal for high density mounting
• Metallurgically enhanced internal contact design for
   greater reliability and lower thermal resistance
• Standard voltage tolerances are +/- 5% with B suffix
   and 10 % with A suffix identification
• Tight tolerances available in plus or minus 2% or
   1% with C or D suffix respectively
• Nonsensitive to ESD
• Hermetically sealed glass package
• Specified capacitance (see Figure 2)
• Inherently radiation hard as described in Microsemi
   MicroNote 050