ISL6315 查看數據表（PDF） - Renesas Electronics
零件编号
产品描述 (功能)
生产厂家
ISL6315 Datasheet PDF : 20 Pages
| |||
ISL6315
maximum input voltage. The input RMS current required for a
multiphase converter can be approximated with the aid of
Figure 12.
0.3
0.2
Use a mix of input bypass capacitors to control the input
voltage ripple. Use ceramic capacitance for the high
frequency decoupling and bulk capacitors to supply the RMS
current. Minimize the connection path inductance of the high
frequency decoupling ceramic capacitors (from drain of upper
MOSFET to source of lower MOSFET).
For bulk capacitance, several electrolytic or high-capacity MLC
capacitors may be needed. For surface mount designs, solid
tantalum capacitors can be used, but caution must be exercised
with regard to the capacitor surge current rating. These capacitors
must be capable of handling the surge-current at power-up.
0.1
IL,P-P = 0
IL,P-P = 0.5 x IO
IL,P-P = 0.75 x IO
0
0
0.1
0.2
0.3
0.4
0.5
DUTY CYCLE (VO /VIN)
FIGURE 12. NORMALIZED INPUT RMS CURRENT vs DUTY
CYCLE FOR A 2-PHASE CONVERTER
As the input capacitors are responsible for sourcing the AC
component of the input current flowing into the upper
MOSFETs, their RMS current capacity must be sufficient to
handle the AC component of the current drawn by the upper
MOSFETs. Figure 12 can be used to determine the input-
capacitor RMS current function of duty cycle, maximum
sustained output current (IO), and the ratio of the peak-to-peak
inductor current (IL,P-P) to the maximum sustained load
current, IO. Figure 12 can also be used as a reference
demonstrating the dramatic reduction in input capacitor RMS
current in a 2-phase DC/DC converter, as compared to a
single-phase regulator.
© Copyright Intersil Americas LLC 2006-2007. All Rights Reserved.
All trademarks and registered trademarks are the property of their respective owners.
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such
modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are
current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its
subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN9222 Rev 1.00
July 18, 2007
Page 19 of 20
Share Link: 