74HC164; 74HCT164
8-bit serial-in, parallel-out shift register
Rev. 9 — 11 June 2020
Product data sheet
1. General description
The 74HC164; 74HCT164 is an 8-bit serial-in/parallel-out shift register. The device features two
serial data inputs (DSA and DSB), eight parallel data outputs (Q0 to Q7). Data is entered serially
through DSA or DSB and either input can be used as an active HIGH enable for data entry through
the other input. Data is shifted on the LOW-to-HIGH transitions of the clock (CP) input. A LOW on
the master reset input (MR) clears the register and forces all outputs LOW, independently of other
inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface
inputs to voltages in excess of VCC.
2. Features and benefits
• Wide supply voltage range from 2.0 to 6.0 V
• CMOS low power dissipation
• High noise immunity
• Input levels:
• For 74HC164: CMOS level
• For 74HCT164: TTL level
• Gated serial data inputs
• Asynchronous master reset
• Complies with JEDEC standards
• JESD8C (2.7 V to 3.6 V)
• JESD7A (2.0 V to 6.0 V)
• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
• ESD protection:
• HBM JESD22-A114F exceeds 2000 V
• MM JESD22-A115-A exceeds 200 V
• Multiple package options
• Specified from -40 °C to +85 °C and -40 °C to +125 °C.
3. Ordering information
Table 1. Ordering information
Type number Package
Temperature range Name
74HC164D
-40 °C to +125 °C SO14
74HCT164D
74HC164DB -40 °C to +125 °C SSOP14
74HCT164DB
74HC164PW -40 °C to +125 °C TSSOP14
74HCT164PW
74HC164BQ -40 °C to +125 °C DHVQFN14
74HCT164BQ
Description
plastic small outline package; 14 leads;
body width 3.9 mm
plastic shrink small outline package; 14 leads;
body width 5.3 mm
plastic thin shrink small outline package; 14 leads;
body width 4.4 mm
plastic dual in-line compatible thermal enhanced
very thin quad flat package; no leads; 14 terminals;
body 2.5 × 3 × 0.85 mm
Version
SOT108-1
SOT337-1
SOT402-1
SOT762-1