V24B24E250BN 查看數據表（PDF） - Vicor
零件编号
产品描述 (功能)
生产厂家
V24B24E250BN Datasheet PDF : 15 Pages
| |||
Parallel Bus Output
24V Input
Module 1
+OUT
+S
SC
–S
–OUT
Module 2
+OUT
+S
SC
–S
–OUT
+OUT
+S
Module N+1 SC
–S
–OUT
+S
Load
–S
• The +OUT and –OUT power buses should be designed to
minimize and balance parasitic impedance from each
module output to the load.
• The +Sense pins must be tied together to form a
+Sense bus. This must be Kelvin connected to +OUT at a
single point. The –Sense pins should be tied together to
form a –Sense bus. This must be Kelvin connected to –OUT
at a single point.
• At the discretion of the power system designer, a subset
of all modules within an array may be configured as slaves
by connecting SC to –S.
• OR’ing diodes may be inserted in series with the +OUT pins
of each module to provide module output fault tolerance.
• The +Sense and -Sense leads should be routed in close
proximity to each other on the printed circuit board. If wires
are used to connect the converters on a PCB to an external
load, the Sense leads should be twisted together to reduce
noise pickup.
Figure 11 — N+1 module array output connections
PIN STYLES*
Designator
(None)
Description
Short
Finish
Tin/Lead
Notes
Requires in-board, mounting
L
Long
Tin/Lead
On-board mounting for 0.065” boards
S
Short ModuMate
Gold
SurfMate or in-board socket mounting
N
Long ModuMate
Gold
F
Short RoHS
Gold
On-board socket mounting
Select for RoHS compliant in-board solder, socket, or SurfMate mounting
G
Long RoHS
Gold
K
Extra Long RoHS
Gold
Select for RoHS compliant on-board solder or socket mounting
Select for RoHS compliance on-board mounting for thicker PCBs
(not intended for socket or Surfmate mounting)
* Pin style designator follows the “B” after the output power and precedes the baseplate designator.
Ex. V24B12T250BN2 — Long ModuMate Pins
Storage
Vicor products, when not installed in customer units, should be stored in ESD safe packaging in accordance with ANSI/ESD S20.20,
“Protection of Electrical and Electronic Parts, Assemblies and Equipment” and should be maintained in a temperature controlled factory/
warehouse environment not exposed to outside elements controlled between the temperature ranges of 15°C and 38°C. Humidity shall not
be condensing, no minimum humidity when stored in an ESD compliant package.
24V Mini Family
Page 13 of 15
Rev 5.1
06/2017
vicorpower.com
800 927.9474
Share Link: 