ADUM6400(Rev0) 查看數據表（PDF） - Analog Devices
零件编号
产品描述 (功能)
生产厂家
ADUM6400 Datasheet PDF : 24 Pages
| |||
ADuM6400/ADuM6401/ADuM6402/ADuM6403/ADuM6404
PACKAGE CHARACTERISTICS
Table 14. Thermal and Isolation Characteristics
Parameter
Symbol Min Typ Max Unit Test Conditions
Resistance (Input to Output)1
RI-O
Capacitance (Input to Output)1
CI-O
Input Capacitance2
CI
1012
Ω
2.2
pF f = 1 MHz
4.0
pF
IC Junction to Ambient Thermal Resistance θJA
45
°C/W Thermocouple located at center of package underside,
test conducted on 4-layer board with thin traces3
1 The device is considered a 2-terminal device: Pin 1 to Pin 8 are shorted together; and Pin 9 to Pin 16 are shorted together.
2 Input capacitance is from any input data pin to ground.
3 See the Thermal Analysis section for thermal model definitions.
REGULATORY APPROVALS
Table 15.
UL (Pending)1
Recognized under 1577 component
recognition program1
5000 V rms isolation voltage double
protection
File E214100
CSA
Approved under CSA Component
Acceptance Notice #5A
Reinforced insulation per CSA 60950-1-03
and IEC 60950-1, 600 V rms (848 V peak)
maximum working voltage
Reinforced insulation per IEC 60601-1
250 V rms (353 V peak) maximum working
voltage
File 205078
VDE (Pending)2
Certified according to DIN V VDE V 0884-10
(VDE V 0884-10):2006-123
Reinforced insulation, 846 V peak
File 2471900-4880-0001
1 In accordance with UL 1577, each ADuM640x is proof tested by applying an insulation test voltage ≥ 6000 V rms for 1 second (current leakage detection limit = 10 μA).
2 In accordance with DIN EN 60747-5-2, each ADuM640x is proof tested by applying an insulation test voltage ≥ 1590 V peak for 1 second (partial discharge detection
limit = 5 pC).
3 In accordance with DIN V VDE V 0884-10, each ADuM640x is proof tested by applying an insulation test voltage ≥1590 V peak for 1 second (partial discharge detection
limit = 5 pC). The * marking branded on the component designates DIN V VDE V 0884-10 approval.
INSULATION AND SAFETY-RELATED SPECIFICATIONS
Table 16. Critical Safety-Related Dimensions and Material Properties
Parameter
Symbol Value
Rated Dielectric Insulation Voltage
5000
Minimum External Air Gap (Clearance)
L(I01) 7.6
Minimum External Tracking (Creepage)
L(I02) >8.0
Minimum Internal Gap (Internal Clearance)
Tracking Resistance (Comparative Tracking Index) CTI
Isolation Group
0.017 min
>400
II
Unit
V rms
mm
mm
mm
V
Test Conditions/Comments
1-minute duration
Measured from input terminals to output terminals,
shortest distance through air
Measured from input terminals to output terminals,
shortest distance path along body
Distance through insulation
IEC 60112
Material group (DIN VDE 0110, 1/89, Table 1)
Rev. 0 | Page 8 of 24
Share Link: 