AD9281ARS 查看數據表（PDF） - Analog Devices

零件编号

产品描述 (功能)

生产厂家

AD9281ARS

Dual Channel 8-Bit Resolution CMOS ADC

Analog Devices 

AD9281

REFERENCE AND REFERENCE BUFFER

The reference and buffer circuitry on the AD9281 is configured

for maximum convenience and flexibility. An illustration of the

equivalent reference circuit is show in Figure 26. The user can

select from five different reference modes through appropriate

pin-strapping (see Table I below). These pin strapping options

cause the internal circuitry to reconfigure itself for the appropri-

ate operating mode.

Mode

1V

2V

Programmable

External

Table I. Table of Modes

Input Span REFSENSE Pin Figure

1V

VREF

22

2V

AGND

23

1 + (R1/R2) See Figure

24

= External Ref AVDD

25

1 V Mode (Figure 22)—provides a 1 V reference and 1 V input

full scale. Recommended for applications wishing to optimize

high frequency performance, or any circuit on a supply voltage

of less than 4 V. The part is placed in this mode by shorting the

REFSENSE pin to the VREF pin.

1V

1V

0V

5k⍀

0V

IINA

QINA

IINB

QINB

10␮F 0.1␮F

10␮F

5k⍀

AD9281

1V

VREF

REFSENSE

0.1␮F

I OR QREFT

0.1␮F

0.1␮F 10␮F

I OR QREFB

0.1␮F

Figure 22. 0 V to 1 V Input

2 V Mode (Figure 23)—provides a 2 V reference and 2 V input

full scale. Recommended for noise sensitive applications on 5 V

supplies. The part is placed in 2 V reference mode by ground-

ing (shorting to AVSS) the REFSENSE pin.

2V

2V

0V

0V

IINA

QINA

5k⍀

IINB

QINB

10␮F

0.1␮F

5k⍀

AD9281

10␮F

0.1␮F

VREF

I OR QREFT

0.1␮F

0.1␮F 10␮F

I OR QREFB

REFSENSE

0.1␮F

Externally Set Voltage Mode (Figure 24)—this mode uses

the on-chip reference, but scales the exact reference level though

the use of an external resistor divider network. VREF is wired to

the top of the network, with the REFSENSE wired to the tap

point in the resistor divider. The reference level (and input full

scale) will be equal to 1 V × (R1 + R2)/R1. This method can be

used for voltage levels from 0.7 V to 2.5 V.

1␮F

0.1␮F

R2

R1

VREF = 1 + R2

R1

VREF

1V

+ +–

–

REFSENSE

AD9281

AVSS

I OR QREFT

I OR QREFB

0.1␮F

0.1␮F 10␮F

0.1␮F

Figure 24. Programmable Reference

External Reference Mode (Figure 25)—in this mode, the on-

chip reference is disabled, and an external reference applied to

the VREF pin. This mode is achieved by tying the REFSENSE

pin to AVDD.

1V

0V

5k⍀

10␮F

1V

EXT

REFERENCE

10␮F

0.1␮F

5k⍀

0.1␮F

AVDD

IINA

IINB

QINA

QINB

AD9281

VREF

I OR QREFT

I OR QREFB

REFSENSE

1V

0V

0.1␮F

0.1␮F 10␮F

0.1␮F

Figure 25. External Reference

Reference Buffer—The reference buffer structure takes the

voltage on the VREF pin and level-shifts and buffers it for use

by various sub-blocks within the two A/D converters. The two

converters share the same reference buffer amplifier to maintain

the best possible gain match between the two converters. In the

interests of minimizing high frequency crosstalk, the buffered

references for the two converters are separately decoupled on

the IREFB, IREFT, QREFB and QREFT pins, as illustrated in

Figure 26.

Figure 23. 0 V to 2 V Input

–10–

REV. E

Share Link: