Optoway
3
SPS-9340RW-CXX0G
**********************************************************************************************************************************************************************
Electrical
Differential Output Voltage
VOH – VOL
0.6
2.0
V
Output LOS Voltage -- Low
VOL
0
0.5
V
6
Output LOS Voltage -- High
LOS Assert Time
VOH
2.0
T_loss_on
Vcc+0.3
V
6
100
µs
LOS Deassert Time
T_loss_off
100
µs
4. Measured at 27-1 PRBS at BER 1E-12 @1300nm.
5. Measured at 223-1 PRBS at BER 1E-10 @ 1300 nm.
6. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
CONNECTION DIAGRAM
PIN Signal Name
Description
PIN Signal Name
Description
1 TX GND
Transmitter Ground
11 RX GND
Receiver Ground
2 TX Fault
Transmitter Fault Indication
12 RX DATA OUT- Inverse Receiver Data Out
3 TX Disable
Transmitter Disable (Module disables 13 RX DATA OUT+ Receiver Data Out
4 MOD-DFE2
on high or open)
Modulation Definition 2 – Two wires 14 RX GND
Receiver Ground
5 MOD-DEF1
serial ID Interface
Modulation Definition 1 – Two wires 15 Vcc RX
Receiver Power – 3.3V±5%
6 MOD-DEF0
serial ID Interface
Modulation Definition 0 – Ground in 16 Vcc TX
Transmitter Power – 3.3V±5%
Module
7 N/C
Not Connected
17 TX GND
Transmitter Ground
8 LOS
Loss of Signal
18 TX DATA IN+ Transmitter Data In
9 RX GND
Receiver Ground
19 TX DATA IN- Inverse Transmitter Data In
10 RX GND
Receiver Ground
MODULE DEFINITION
20 TX GND
Transmitter Ground
Module Definition
4
MOD-DEF2
PIN 4
SDA
MOD-DEF1
PIN 5
SCL
MOD-DEF0
PIN 6
LV-TTL Low
Interpretation by Host
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2008 V1.0