SIL30E-12W3V3-VJ 查看數據表（PDF） - Emerson Network Power
零件编号
产品描述 (功能)
生产厂家
SIL30E-12W3V3-VJ Datasheet PDF : 5 Pages
| |||
Embedded Power for
Business-Critical Continuity
Ordering Information
Output Power
(Max.)
Input Voltage
99 W
8 - 14 Vdc
Output Voltage
0.8 - 3.63 Vdc
Output Current
Min
Max
0A
30 A
Efficiency
(typ)
93%
Regulation
Line
Load
± 0.2%
± 1.5%
Rev.7.28.09_40
SIL30E Series
of 5
Mo��d�e�l �N�u�m��b�e�r�s (2,3)
SIL30E-12W3V3-VJ
Part Number System with Options
SIL30E-12W3V3-VJ
Product Family
SIL = Single In Line
Packaging Options
J = Pb-free (RoHS 6/6 compliant) (2)
Rated Output Current
30 = 30 Amps
Performance
E = Enhanced Performance
Mounting Option
V = Vertical
Output Voltage
0.8 Vdc to 3.63 Vdc
Type of Output
W = Wide
Input Voltage
12 = 8 Vdc to 14 Vdc
Output Voltage Adjustment of the SIL30E-12W3V3 Series
The ultra-wide output voltage trim range offers major advantages to users who
select the SIL30E-12W3V3. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SIL30E-12W3V3 converter
leaves the factory the output has been adjusted to the default voltage of 0.8 V.
Notes
1 The SIL30E features a ‘Positive Logic’ Remote ON/OFF operation. If not using
the Remote ON/OFF pin, leave the pin open (the converter will be on). The
Remote ON/OFF pin is referenced to ground.
The following conditions apply for the SIL30E:
Configuration
Remote pin open circuit
Remote pin pulled low [Von/off < 0.8 V]
Remote pin pulled high [Von/off >2.8 V]
Converter Operation
Unit is ON
Unit is OFF
Unit is ON
A ‘Negative Logic’ Remote ON/OFF version is also possible with this
converter. Please consult the factory for details.
2 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special
request, please contact your local sales representative for details.
3 NOTICE: Some models do not support all options. Please contact your
local Emerson Network Power representative or use the on-line model
number search tool at http://www.PowerConversion.com to find a suitable
alternative.
Notes
A The derating curve represents the condition at which internal components
are within the Artesyn derating guidelines.
B Characteristic data has been developed from actual products tested at 25 °C.
This data is considered typical data for the converter.
Share Link: 