PALCE16V8H 查看數據表（PDF） - Lattice Semiconductor
零件编号
产品描述 (功能)
生产厂家
PALCE16V8H Datasheet PDF : 32 Pages
| |||
ABSOLUTE MAXIMUM RATINGS
OPERATING RANGES
Storage Temperature . . . . . . . . . . . . . .-65°C to +150°C Commercial (C) Devices
Ambient Temperature
with Power Applied . . . . . . . . . . . . . .-55°C to +125°C
Ambient Temperature (TA)
Operating in Free Air . . . . . . . . . . . . . . . 0°C to +75°C
Supply Voltage
with Respect to Ground . . . . . . . . . . -0.5 V to + 7.0 V
Supply Voltage (VCC)
with Respect to Ground . . . . . . . . . +4.75 V to +5.25 V
DC Input Voltage . . . . . . . . . . . -0.5 V to VCC + 0.5 V Industrial (I) Devices
DC Output or I/O
Pin Voltage . . . . . . . . . . . . . . . . . -0.5 V to VCC + 0.5 V
Temperature (TA) Operating
in Free Air . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
Static Discharge Voltage . . . . . . . . . . . . . . . . . 2001 V
Supply Voltage (VCC)
Latchup Current (TA = -40°C to +85°C). . . . . . . 100 mA
Stresses above those listed under Absolute Maximum Ratings
may cause permanent device failure. Functionality at or above
these limits is not implied. Exposure to Absolute Maximum Rat-
ings for extended periods may affect device reliability. Pro-
with Respect to Ground . . . . . . . . . . . +4.5 V to +5.5 V
R Operating ranges define those limits between which the func-
FO tionality of the device is guaranteed.
gramming conditions may differ.
ES DC CHARACTERISTICS OVER COMMERCIAL AND INDUSTRIAL OPERATING
IC S RANGES
N Parameter
EV IG Symbol
Parameter Description
D S VOH
Output HIGH Voltage
E VOL
Output LOW Voltage
L D VIH
Input HIGH Voltage
GA W VIL
Input LOW Voltage
E E IIH
Input HIGH Leakage Current
S N IIL
Input LOW Leakage Current
U IOZH
Off-State Output Leakage Current HIGH
Test Description
IOH = –3.2 mA, VIN = VIH or VIL, VCC = Min
IOL = 24 mA, VIN = VIH or VIL, VCC = Min
Guaranteed Input Logical HIGH
Voltage for all Inputs (Note 1)
Guaranteed Input Logical LOW
Voltage for all Inputs (Note 1)
VIN = 5.25 V, VCC = Max (Note 2)
VIN = 0 V, VCC = Max (Note 2)
VOUT = 5.25 V, VCC = Max
VIN = VIH or VIL (Note 2)
Min Max Unit
2.4
V
0.5
V
2.0
V
0.8
V
10
µA
–100
µA
10
µA
IOZL
Off-State Output Leakage Current LOW
VOUT = 0 V, VCC = Max
VIN = VIH or VIL (Note 2)
–100
µA
ISC
Output Short-Circuit Current
VOUT = 0.5 V, VCC = Max (Note 3)
–30 –150 mA
Commercial Supply Current
ICC (Dynamic)
Industrial Supply Current
Outputs Open (IOUT = 0 mA)
VCC = Max, f = 15 MHz
115
mA
130
mA
Notes:
1. These are absolute values with respect to device ground, and all overshoots due to system or tester noise are included.
2. I/O pin leakage is the worst case of IIL and IOZL (or IIH and IOZH).
3. Not more than one output should be shorted at a time, and the duration of the short-circuit should not exceed one second.
VOUT = 0.5 V has been chosen to avoid test problems caused by tester ground degradation.
PALCE16V8H-10 (Com’l, Ind)
13
Share Link: 