Figure 5: Typical Application Circuit for U.S. Application.
L3037
680nF
ELECTRICAL CHARACTERISTICS TEST CONDITION, unless otherwise specified: VCC = 5V;
VSS = -5V; VBAT = -48V; AGND = BGND; Direct Polarity; TA = 25°C.
Note: Testing of all parameters is performed at 25°C. Characterization as well as the design rules used
allow correlation of tested performances at other temperatures. All parameters listed here are
met in the range 0°C to +70°C. Functionality between -40°C and 85°C is verified.
Symbol
Parameter
INTERFACE REQUIREMENTS 2 WIRE PORT
Test Condition
Min. Typ. Max. Unit
Vab
Overload Level Voice Signal
Rp +PTC = 50Ω
300Hz to 3.4KHz (*)
Zll
Long Input Impedance
at SLIC terminals per wire
Ill
Long Current Capab. ac
standby per wire (on HOOK)
active per wire (on HOOK)
Ill
Longitudinal Current Capability active per wire off HOOK
(IT = Transversal current)
4 WIRE TRANS PORT
Vtx
Overload Level
Vtoff
Output Offset Voltage
Ztx
Output Impedance
(*) At TIP/RING line connection with ZLINE (AC) = 600Ω. For any DC Loop current from 0mA to ILIM
4.1
17
17
75-IT
1.8
-350
Vpk
10
Ω
mApk
mApk
mApk
Vpk
+350 mV
10
Ω
11/22