AD5724 查看數據表（PDF） - Analog Devices
零件编号
产品描述 (功能)
生产厂家
AD5724 Datasheet PDF : 31 Pages
| |||
Data Sheet
AD5724/AD5734/AD5754
OUTPUT RANGE SELECT REGISTER
The output range select register is addressed by setting the three REG bits to 001. The DAC address bits select the DAC channel and the
range bits (R2, R1, R0) select the required output range (see Table 21 and Table 22).
Table 21. Programming the Required Output Range
MSB
LSB
R/W
Zero
REG2 REG1 REG0 A2
A1
A0
DB15 to DB3 DB2
DB1
DB0
0
0
0
0
1
DAC address
Don’t care
R2
R1
R0
Table 22. Output Range Options
R2
R1
R0
0
0
0
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
Output Range (V)
+5
+10
+10.8
±5
±10
±10.8
CONTROL REGISTER
The control register is addressed by setting the three REG bits to 011. The value written to the address and data bits determines the
control function selected. The control register options are shown in Table 23 and Table 24.
Table 23. Programming the Control Register
MSB
R/W Zero REG2 REG1 REG0 A2 A1 A0 DB15 to DB4 DB3
DB2
DB1
0
0
0
1
1
000
NOP, data = don’t care
0
0
0
1
1
0 0 1 Don’t care
TSD enable Clamp enable CLR select
0
0
0
1
1
100
Clear, data = don’t care
0
0
0
1
1
101
Load, data = don’t care
LSB
DB0
SDO disable
Table 24. Explanation of Control Register Options
Option
Description
NOP
No operation instruction used in readback operations.
Clear
Addressing this function sets the DAC registers to the clear code and updates the outputs.
Load
Addressing this function updates the DAC registers and, consequently, the DAC outputs.
SDO Disable
Set by the user to disable the SDO output. Cleared by the user to enable the SDO output (default).
CLR Select
See Table 25 for a description of the CLR select operation.
Clamp Enable
Set by the user to enable the current-limit clamp. The channel does not power down upon detection of an
overcurrent; the current is clamped at 20 mA (default).
Cleared by the user to disable the current-limit clamp. The channel powers down upon detection of an overcurrent.
TSD Enable
Set by the user to enable the thermal shutdown feature. Cleared by the user to disable the thermal shutdown
feature (default).
Table 25. CLR Select Options
CLR Select Setting
0
1
Unipolar Output Range
0V
Midscale
Output CLR Value
Bipolar Output Range
0V
Negative full scale
Rev. F | Page 25 of 31
Share Link: 