FT232BM(2004) 查看數據表（PDF） - Future Technology
零件编号
产品描述 (功能)
生产厂家
FT232BM Datasheet PDF : 54 Pages
| |||
FT2232C Dual USB UART / FIFO I.C.
• Programmable Receive Buffer Timeout
• Extended EEPROM Support
The TX buffer timeout is programmable over USB in
The FT2232C supports 93C46 (64 x 16 bit), 93C56
1ms increments from 1ms to 255ms, thus allowing
(128 x 16 bit), and 93C66 (256 x 16 bit) EEPROMs.
the device to be better optimised for protocols
The extra space is not used by the device, however
requiring faster response times from short data
it is available for use by other external MCU / logic
packets.
whilst the FT2232C is being held in reset. There is
now an adiitional 64 words of space available (128
• Relaxed VCC Decoupling
bytes total) in the user area when a 93C56 or 93C66
The improved level of Vcc decoupling that was
incorporated into BM devices has also been
is used.
implemented in the FT2232C device.
• USB 2.0 (full speed option)
• Baud Rate Pre-Scaler Divisors
The FT2232C (UART mode) baud rate pre-scaler
supports division by (n+0), (n+0.125), (n+0.25),
(n+0.375), (n+0.5), (n+0.625), (n+0.75) and (n+0.875)
where n is an integer between 2 and 16,384 (214).
An EEPROM based option allows the FT2232C to
return a USB 2.0 device descriptor as opposed to
USB 1.1. Note : The device would be a USB 2.0 Full
Speed device (12Mb/s) as opposed to a USB 2.0
High Speed device (480Mb/s).
DS2232C Version 1.2
© Future Technology Devices International Ltd. 2004
Page 4 of 54
Share Link: 