LTC1420I 查看數據表（PDF） - Linear Technology
零件编号
产品描述 (功能)
生产厂家
LTC1420I Datasheet PDF : 20 Pages
| |||
LTC1420
APPLICATIONS INFORMATION
Table 2. Comparison of Analog Input Configurations
SUPPLIES
COUPLING
VREF
GAIN
±5V
DC
4.096V
1×
5V
DC
4.096V
2×
5V
DC
2.048V
1×
5V
DC
4.096V
1×
5V
DC
4.096V
1×
±5V
AC
4.096V
1×
(Transformer)
5V
AC
4.096V
1×
(Transformer)
AIN +
±2.048
2.5 ± 1.024
2.5 ± 1.024
2.5 ± 2.048
0 to 4.096
±1.024
2.5 ± 1.024
AIN –
0
2.5
2.5
2.5
2.048
±1.024
COMMENTS
Best SNR, THD
Best SINAD, THD for Single Supply
Worse Noise than Above Case
Best Single Supply Noise, THD Is Not Optimal
Same As Above
Very Best SNR, THD
2.5 ± 1.024 Very Best SNR, THD for Single Supply
DC Coupling the Input
In most applications the analog input signal can be directly
coupled to the LTC1420 inputs. If the input signal is
centered around ground, such as when dual supply op
amps are used, simply connect – AIN to ground and
connect VSS to – 5V (Figure 4). In a single power supply
system with the input signal centered around 2.5V, con-
nect – AIN to VCM and VSS to ground (Figure 5). If the input
signal is not centered around ground or 2.5V, the voltage
for – AIN must be generated externally by a resistor divider
or a voltage reference (Figure 6).
5V
0V
VIN
+AIN
LTC1420
–AIN
VCM VSS
1µF
1420 F04
–5V
Figure 4. DC Coupling a Ground
Centered Signal (Dual Supply System)
5V
2.5V
VIN
+AIN
LTC1420
–AIN
VCM VSS
1µF
1420 F05
4.096V
0V
5V
VIN
2.048V
5V
+AIN
LTC1420
–AIN
SENSE
VSS
1420 F06
Figure 6. DC Coupling a 0V to 4.096V Signal
AC Coupling the Input
The analog inputs to the LTC1420 can also be AC coupled
through a capacitor, though in most cases it is simpler to
directly couple the input to the ADC. Figure 7 shows an
example where the input signal is centered around ground
and the ADC operates from a single 5V supply. Note that
the performance would improve if the ADC was operated
from a dual supply and the input was directly coupled (as
in Figure 4). With AC coupling the DC resistance to ground
should be roughly matched for + AIN and – AIN to maintain
offset accuracy.
5V
C
0V
VIN
C
RR
+AIN
LTC1420
–AIN
VCM VSS
1µF
1420 F07
Figure 5. DC Coupling a Signal Centered
Around 2.5V (Single Supply System)
Figure 7. AC Coupling to the LTC1420. Note That the Input Signal
Can Almost Always Be Directly Coupled with Better Performance
10
Share Link: 