[LANTRONIX]

Introduction
The XPort Pro Lx6 embedded Ethernet device server is a complete network-enabling solution in a 30 (1.181) X 55 (2.165) X 6.45 (0.248) package. This miniature device server empowers original equipment manufacturers (OEMs) to go to market quickly and easily with Ethernet networking and web page serving capabilities built into their products.

KEY FEATUREs
◆ Power Supply: Regulated 3.3V input required. There is a step-down converter to 1.5V for the processor core and 1.8V for the memory subsystem. All voltages have LC filtering to minimize noises and emissions.
◆ Controller: MCF520X microprocessor running at 166.67 megahertz (Mhz) with 8 Kilobyte (KB) Configurable Cache.
◆ Memory: Up to 16 MB SDRAM, 16 MB Flash and 16KB Internal SRAM.
◆ Ethernet: 10/100 megabits per second (Mbps) Ethernet transceiver.
◆ One 10Base-T or 100Base-TX Ethernet Port
◆ Serial Ports: One high speed RS232/RS485 serial port baud rate support from 300 to 921600. Baud rate of 460800 is not supported
◆ Interface Signals: 3.3V-level interface signals.
◆ Configurable IO Pins (CPs): Up to three pins are configurable as general purpose I/Os if no modem control signal is used on serial ports. Not 5V tolerant.
◆ Configuration via CLI, XML and HTTP.
◆ Temperature Range: Operates over a temperature range of -40°C to +85°C (-40°F to 185°F). The storage temperature range is -40°C to 85°C (-40°F to 185°F).

APPLICATIONs
The XPort Pro Lx6 embedded device server connects serial devices such as those listed below to Ethernet networks using the IP protocol family.
◆ ATM machines
◆ CNC controllers
◆ Data collection devices
◆ Universal Power Supply (UPS) management unit
◆ Telecommunications equipment
◆ Data display devices
◆ Security alarms and access control devices
◆ Handheld instruments
◆ Modems
◆ Time/attendance clocks and terminals
◆ Patient Monitoring Devices
◆ Glucose Analyzers
◆ Infusion Pumps