OUTLINE
The R1113Z Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistors, a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load transient response of the R1113Z Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the package for these ICs is WL-CSP4-P1 (Wafer Level CSP), high density mounting of the ICs on boards is possible.

FEATURES
• Ultra-Low Supply Current................................................Typ. 100µA
• Standby Mode .................................................................Typ. 0.1µA
• Low Dropout Voltage.......................................................Typ. 0.23V (IOUT=100mA 3.0V Output type)
• High Ripple Rejection .....................................................Typ. 80dB(f=1kHz 3.0V Output type)
• Low Temperature-Drift Coefficient of Output Voltage......Typ. ±100ppm/°C
• Excellent Line Regulation ...............................................Typ. 0.05%/V
• High Output Voltage Accuracy ........................................±2.0%
• Excellent Dynamic Response
• Small Package ..............................................................WL-CSP4-P1 (Wafer Level CSP)
• Output Voltage .................................................. .............Stepwise setting with a step of 0.1V in the range of 1.5V to5.0V is possible
• Built-in Chip Enable Circuit (2 types; A: active low, B: active high)
• Built-in Fold Back Protection Circuit ...............................Typ. 30mA (Current at short mode)
• Ceramic capacitors are recommended to be used with this IC

APPLICATIONS
• Power source for cellular phones such as GSM, CDMA and various kinds of PCS.
• Power source for electrical appliances such as cameras, VCRs and camcorders.
• Power source for battery-powered equipment.