GENERAL DESCRIPTION
The IS25LP032/064/128 Serial Flash memory offers a versatile storage solution with high flexibility and performance in a simplified pin count package. ISSI’s “Industry Standard Serial Interface” Flash are for systems that require limited space, a low pin count, and low power consumption. The IS25LP032/064/128 is accessed through a 4-wire SPI Interface consisting of a Serial Data Input (Sl), Serial Data Output (SO), Serial Clock (SCK), and Chip Enable (CE#) pins, which can also be configured to serve as multi-I/O (see pin descriptions).

FEATURES
• Industry Standard Serial Interface
   - IS25LP128: 128M-bit/16M-byte
   - IS25LP064: 64M-bit/8M-byte
   - IS25LP032: 32M-bit/4M-byte
   - 256 bytes per Programmable Page
   - Supports standard SPI, Fast, Dual, Dual
      I/O, QPI, SPI DTR, Dual SPI DTR I/O,
      and QPI
   - Double Transfer Rate (DTR) option
   - Supports Serial Flash Discoverable
      Parameters (SFDP)
• High Performance Serial Flash (SPI)
   - 50MHz Normal and 133Mhz Fast Read
   - 532 MHz equivalent QPI
   - DTR (Dual Transfer Rate) up to 66MHz
   - Selectable dummy cycles
   - Configurable drive strength
   - Supports SPI Modes 0 and 3
   - More than 100,000 erase/program cycles
   - More than 20-year data retention
• Flexible & Efficient Memory Architecture
   - Chip Erase with Uniform: Sector/Block
      Erase (4K/32K/64K-Byte)
   - Program 1 to 256 bytes per page
   - Program/Erase Suspend & Resume
• Efficient Read and Program modes
   - Low Instruction Overhead Operations
   - Continuous Read 8/16/32/64-Byte burst
   - Selectable burst length
   - QPI for reduced instruction overhead
• Low Power with Wide Temp.
   Ranges
   - Single 2.3V to 3.6V Voltage Supply
   - 10 mA Active Read Current
   - 10 µA Standby Current
   - 5 µA Deep Power Down
   - Temp Grades:
      Extended: -40°C to +105°C
      V Grade: -40°C to +125°C
      Auto Grade: up to +125°C
• Advanced Security Protection
   - Software and Hardware Write Protection
   - Power Supply lock protect
   - 4x256-Byte dedicated security area
      with user-lockable bits, (OTP) One
      Time Programmable Memory
   - 128 bit Unique ID for each device
• Industry Standard Pin-out & Packages
   - JM =16-pin SOIC 300mil
   - JB = 8-pin SOIC 208mil
   - JF = 8-pin VSOP 208mil
   - JK = 8-contact WSON 6x5mm
   - JL = 8-contact WSON 8x6mm
   - JG= 24-ball TFBGA 6x8mm
   - KGD (call factory)