74LVC821A Даташит - ETC2
Номер в каталоге
74LVC821A
производитель

ETC2
General description
The 74LVC821A is a high performance, low power, low voltage Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3 V or 5 V devices. In 3-state operation, outputs can handle 5 V. This feature allows the use of these devices as translators in a mixed 3.3 V and 5 V environment.
FEATUREs
■ 5 V tolerant inputs and outputs; for interfacing with 5 V logic
■ Wide supply voltage range from 1.2 V to 3.6 V
■ Inputs accept voltages up to 5.5 V
■ CMOS low power consumption
■ Direct interface with TTL levels
■ Flow-through pin-out architecture
■ 10-bit positive edge-triggered register
■ Independent register and 3-state buffer operation
■ Complies with JEDEC standard JESD8-B
■ ESD protection:
◆ HBM EIA/JESD22-A114-B exceeds 2000 V
◆ MM EIA/JESD22-A115-A exceeds 200 V.
■ Specified from −40 °C to +85 °C and −40 °C to +125 °C.
Page Link's:
1
2
3
4
5
6
7
8
9
10
More Pages
Номер в каталоге
Компоненты Описание
View
производитель
10-bit D-type flip-flop with 5 V tolerant inputs/outputs; positive-edge trigger; 3-state
NXP Semiconductors.
10-bit D-type flip-flop with 5-volt tolerant inputs/outputs; positive-edge trigger (3-State) ( Rev : 2004 )
Philips Electronics
10-bit D-type flip-flop with 5-volt tolerant inputs/outputs; positive-edge trigger (3-State)
Philips Electronics
Octal D-type flip-flop; 5 V tolerant inputs/outputs; positive-edge trigger; 3-state
NXP Semiconductors.
9-bit D-type flip-flop with 5 V tolerant inputs/outputs; positive edge-trigger; 3-state
NXP Semiconductors.
Octal D-type flip-flop with 5 V tolerant inputs/outputs; positive edge-trigger; 3-state
NXP Semiconductors.
9-bit D-type flip-flop with 5-volt tolerant inputs/outputs; positive-edge trigger (3-State)
Philips Electronics
Octal D-type flip-flop with 5-volt tolerant inputs/outputs; positive edge-trigger (3-State)
Philips Electronics
Octal D-type flip-flop with 5-volt tolerant inputs/outputs; positive edge-trigger (3-State)
Philips Electronics
10-bit D-type flip-flop; positive-edge trigger (3-State)
Philips Electronics