OPI125 Просмотр технического описания (PDF) - Optek Technology
Номер в каталоге
Компоненты Описание
производитель
OPI125 Datasheet PDF : 3 Pages
| |||
Photologic® Optically Coupled Isolator
OPI125, OPI126, OPI127, OPI127-032, OPI128
OPI125 - Totem Pole Output
OPI126 - Open Collector Output
OPI127 - Inverted Totem Pole Output
OPI128 - Inverted Open Collector Output
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature
Operating Temperature
Supply Voltage, VCC (not to exceed 3 seconds)
Input-to-Output Isolation Voltage(1)(2)
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)(3)
Input Diode
Forward DC Current
Reverse DC Voltage
Power Dissipation(4)
Output Photosensor
Output Photologic® Power Dissipation(5)
Duration of Output Short to VCC or Ground (OPI125, OPI127)
Duration of Output Short to VCC (OPI126, OPI128)
Voltage at Output Lead (OPI126, OPI128)
-55° C to +100° C
-55° C to +100° C
+10 V
± 15 kVDC
260° C
25 mA
2V
200 mW
120 mW/° C
1.00 second
1.00 second
35 V
Notes:
(1) Measured with input and output leads shorted.
(2) UL recognition is for 3750 VAC to 100° C.
(3) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(4) Derate linearly 1.33 mW/° C above 25° C.
(5) Derate linearly 3.40 mW/° C above 25° C.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue C 11/2010
Page 2 of 3
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Share Link: 