2SK4005-01MR Просмотр технического описания (PDF) - Fuji Electric

Номер в каталоге

Компоненты Описание

производитель

2SK4005-01MR

Power MOSFET

Fuji Electric 

･ Theheatsinkshouldhaveaflatnesswithin±30μmandroughnesswithin10μm.Also,keepthetightening

torque within the limits of this specification.

･ Improper handling may cause isolation breakdown leading to a critical accident.

ex.) Over plane off the edges of screw hole. (Recommended plane off the edge is C<1.0mm)

･ We recommend the use of thermal compound to optimize the efficiency of heat radiation. It is important to

evenly apply the compound and to eliminate any air voids.

Storage

･ The MOSFETs must be stored at a standard temperature of 5 to 35ｰC and relative humidity of 45 to 75%.

･ If the storage area is very dry, a humidifier may be required. In such a case, use only deionized water or boiled

water, since the chlorine in tap water may corrode the leads.

･ The MOSFETs should not be subjected to rapid changes in temperature to avoid condensation on the surface

of the MOSFETs. Therefore store the MOSFETs in a place where the temperature is steady.

･ The MOSFETs should not be stored on top of each other, since this may cause excessive external force on the

case.

･ The MOSFETs should be stored with the lead terminals remaining unprocessed. Rust may cause presoldered

connections to fail during later processing.

･ The MOSFETs should be stored in antistatic containers or shipping bags.

11.Appendix

･ This products does not contain PBBs (Polybrominated Biphenyl) or PBDEs (Polybrominated Diphenyl Ether ) ,

substances.

･ This products does not contain Class-I ODS and Class-II ODS substances set force by ‘CleanAirActofUS’

law.

･ If you have any questions about any part of this Specification, please contact Fuji

Electric or its sales agent before using the product.

･ Neither Fuji nor its agents shall be held liable for any injury caused by using the products

not in accordance with the instructions.

･ The application examples described in this specification are merely typical uses of Fuji

Electric products.

･ This specification does not confer any industrial property rights or other rights, nor

constitute a license for such rights.

Fuji Electric Device Technology Co.,Ltd.

MS5F5984 11 / 18

H04-004-03

Share Link: