AXA010A0X3Z Просмотр технического описания (PDF) - Unspecified

Номер в каталоге

Компоненты Описание

производитель

AXA010A0X3Z

10Vdc – 14Vdc input; 0.75Vdc to 5.5Vdc Output;10A Output Current

Unspecified 

Data Sheet

March 30, 2008

12V Austin LynxTM SIP Non-isolated Power Modules, Programmable:

10Vdc – 14Vdc input; 0.75Vdc to 5.5Vdc Output;10A Output Current

Design Considerations (continued)

Output Filtering

The 12V Austin Lynx Programmable SIP module is

designed for low output ripple voltage and will meet the

maximum output ripple specification with 1 µF ceramic

and 10 µF tantalum capacitors at the output of the

module. However, additional output filtering may be

required by the system designer for a number of

reasons. First, there may be a need to further reduce

the output ripple and noise of the module. Second, the

dynamic response characteristics may need to be

customized to a particular load step change.

To reduce the output ripple and improve the dynamic

response to a step load change, additional capacitance

at the output can be used. Low ESR polymer and

ceramic capacitors are recommended to improve the

dynamic response of the module. For stable operation

of the module, limit the capacitance to less than the

maximum output capacitance as specified in the

electrical specification table.

Safety Considerations

For safety agency approval the power module must be

installed in compliance with the spacing and separation

requirements of the end-use safety agency standards,

i.e., UL 60950-1, CSA C22.2 No. 60950-1-03, and VDE

0850:2001-12 (EN60950-1) Licensed.

For the converter output to be considered meeting the

requirements of safety extra-low voltage (SELV), the

input must meet SELV requirements. The power

module has extra-low voltage (ELV) outputs when all

inputs are ELV.

The input to these units is to be provided with a fast-

acting fuse with a maximum rating of 15A in the positive

input lead.

LINEAGE POWER

11

Share Link: