XRT83SH314
14-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT
REV. 1.0.4
• Fully integrated 14-Channel short haul transceivers for T1/J1 (1.544MHz) and E1 (2.048MHz) applications.
• T1/E1/J1 short haul and clock rate are per port selectable through software without changing components.
• Internal Impedance matching on both receive and transmit for 75Ω (E1), 100Ω (T1), 110Ω (J1), and 120Ω
(E1) applications are per port selectable through software without changing components.
• Power down on a per channel basis with independent receive and transmit selection.
• Five pre-programmed transmit pulse settings for T1 short haul applications per channel.
• User programable Arbitrary Pulse mode
• On-Chip transmit short-circuit protection and limiting protects line drivers from damage on a per channel
basis.
• Selectable Crystal-Less digital jitter attenuators (JA) with 32-Bit or 64-Bit FIFO for the receive or transmit
path
• On-Chip frequency multiplier generates T1 or E1 master clocks from a variety of external clock sources (8,
16, 56, 64, 128, 256kHz and 1X, 2X, 4X, 8X T1 or E1)
• Driver failure monitor output (DMO) alerts of possible system or external component problems.
• Transmit outputs and receive inputs may be "High" impedance for protection or redundancy applications on a
per channel basis.
• Support for automatic protection switching.
• 1:1 and 1+1 protection without relays.
• Receive monitor mode handles 0 to 6dB resistive attenuation (flat loss) along with 0 to 6dB cable loss for
both T1 and E1.
• Loss of signal (RLOS) according to ITU-T G.775/ETS300233 (E1) and ANSI T1.403 (T1/J1).
• Programmable data stream muting upon RLOS detection.
• On-Chip HDB3/B8ZS encoder/decoder with an internal 16-bit LCV counter for each channel.
• On-Chip digital clock recovery circuit for high input jitter tolerance.
• QRSS/PRBS pattern generator and detection for testing and monitoring.
• Error and bipolar violation insertion and detection.
• Transmit all ones (TAOS) Generators and Detectors
• Supports local analog, remote, digital, and dual loopback modes
• 153mW per channel Power consumption
• Single 3.3V supply operation (3V to 5V I/O tolerant)
• 304-Pin TBGA package
• -40°C to +85°C Temperature Range
• Supports gapped clocks for mapper/multiplexer applications
PRODUCT ORDERING INFORMATION
PRODUCT NUMBER
PACKAGE TYPE
XRT83SH314IB
304 Lead TBGA
OPERATING TEMPERATURE RANGE
-40°C to +85°C
2