WM9711LGEFL/RV Просмотр технического описания (PDF) - Wolfson Microelectronics plc

Номер в каталоге

Компоненты Описание

производитель

WM9711LGEFL/RV

Low Power Audio CODEC for Portable Applications

Wolfson Microelectronics plc 

WM9711L

DEVICE DESCRIPTION

Production Data

INTRODUCTION

The WM9711L is designed to meet the mixed-signal requirements of portable and wireless computer

systems. It includes audio recording and playback, analogue comparators for battery alarms, and

GPIO functions, all controlled through a single 5-wire AC-Link interface.

SOFTWARE SUPPORT

The basic audio features of the WM9711L are software compatible with standard AC’97 device

drivers. However, to better support its unique and additional functions, Wolfson Microelectronics

supplies custom device drivers for selected CPUs and operating systems. Please contact your local

Wolfson Sales Office for more information.

AC’97 COMPATIBILITY

The WM9711L uses an AC’97 interface to communicate with a microprocessor or controller. The

audio and GPIO functions are largely compliant with AC’97 Revision 2.2. The following differences

from the AC’97 standard are noted:

• Pinout: The function of some pins has been changed to support device specific features.

The PHONE and PCBEEP pins have been moved to different locations on the device

package.

• Package: The default package for the WM9711L is a 7×7mm leadless QFN package.

However, it may also be supplied in a 48-pin TQFP package, as specified in the AC’97

standard.

• Audio mixing: The WM9711L handles all the audio functions of a smartphone, including

audio playback, voice recording, phone calls, phone call recording, ring tones, as well as

simultaneous use of these features. The AC’97 mixer architecture does not fully support

this. The WM9711L therefore uses a modified AC’97 mixer architecture with three

separate mixers.

• Tone Control, Bass Boost and 3D Enhancement: These functions are implemented in

the digital domain and therefore affect only signals being played through the audio

DACs, not all output signals as stipulated in AC’97.

Some other functions are additional to AC’97:

• On-chip BTL loudspeaker driver

• On-chip BTL driver for ear speaker (phone receiver)

• Auxiliary mono DAC for ring tones, system alerts etc.

• 2 Analogue Comparators for Battery Alarm

• Programmable Filter Characteristics for Tone Control and 3D Enhancement

w

PD Rev 4.1 April 2004

12

Share Link: