White Electronic Designs
WF2M32-XXX5
FIGURE 6 – WRITE/ERASE/PROGRAM OPERATION, WE# CONTROLLED
NOTES:
1. PA is the address of the memory location to be programmed.
2. PD is the data to be programmed at byte address.
3. D7# is the output of the complement of the data written to each chip.
October 2004
Rev. 5
4. DOUT is the output of the data written to the device.
5. Figure indicates last two bus cycles of four bus cycle sequence.
7
White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com