S3C2400X01 Просмотр технического описания (PDF) - Samsung

Номер в каталоге

Компоненты Описание

производитель

S3C2400X01

32-Bit RISC Microprocessor

Samsung 

PRODUCT OVERVIEW

S3C2400 RISC MICROPROCESSOR

FEATURES

Architecture

• Integrated system for hand-held devices and

general embedded applications.

• 16/32-Bit RISC architecture and powerful

instruction set with ARM920T CPU core.

• Enhanced ARM architecture MMU to support

WinCE, EPOC 32 and Linux.

• Instruction cache, data cache, write buffer and

Physical address TAG RAM to reduce the effect

of main memory bandwidth and latency on

performance.

• ARM920T CPU core supports the ARM debug

architecture and has a Tracking ICE mode.

• Internal AMBA(Advanced Microcontroller Bus

Architecture) (AMBA2.0, AHB/APB)

System Manager

• Little/Big Endian support.

• Address space: 32M bytes for each bank

(Total 256Mbyte)

• Supports programmable 8/16/32-bit data bus

width for each bank.

• Fixed bank start address and programmable bank

size for 7 banks.

• Programmable bank start address and bank size

for one bank.

• 8 memory banks.

— 6 memory banks for ROM, SRAM etc.

— 2 memory banks for ROM/SRAM/DRAM(EDO

or Synchronous DRAM)

• Fully Programmable access cycles for all

memory banks.

• Supports external wait signal to expend the bus

cycle.

• Supports self-refresh mode in DRAM/SDRAM for

power-down.

• Supports asymmetric/symmetric address of

DRAM.

Cache Memory

• 64 way set-associative cache with I-Cache(16KB)

and D-Cache(16KB).

• 8-words per line with one valid bit and two dirty

bits per line

• Pseudo random or round robin replacement

algorithm.

• Write through or write back cache operation to

update the main memory.

• The write buffer can hold 16 words of data and four

address.

Clock & Power Manager

• Low power

• The on-chip MPLL and UPLL

UPLL makes the clock for operating USB

Host/Device.

MPLL makes the clock for operating MCU at

maximum 150Mhz @ 1.8V.

• Clock can be fed selectively to each function

block by software.

• Power mode: Normal, Slow, Idle, Stop mode and

SL_IDLE mode.

Normal mode: Normal operating mode.

Slow mode: Low frequency clock without PLL.

Idle mode: Stop the clock for only CPU.

Stop mode: All clocks are stopped.

SL_IDLE mode: All clocks except LCD are

stopped.

• Wake up by EINT[7:0] or RTC alarm interrupt from

Stop mode.

Interrupt Controller

• 32 Interrupt sources

(Watch dog timer, 5Timer, 6UART, 8External

interrupts, 4 DMA, 2 RTC, 1 ADC, 1 IIC, 1 SPI, 1

MMC, 2 USB)

• Level/Edge mode on external interrupt source.

• Programmable polarity of edge and level.

• Supports FIQ (Fast Interrupt request) for very

urgent interrupt request.

1-2

Share Link: