32-Tap, Nonvolatile, Linear-Taper Digital
Potentiometers in SOT23
ABSOLUTE MAXIMUM RATINGS
VDD to GND ...........................................................-0.3V to +6.0V
All Other
Pins to GND .........-0.3V to the lower of (VDD + 0.3V) or +6.0V
Maximum Continuous Current into H, L, and W
MAX5471/MAX5474 .....................................................±1.3mA
MAX5472/MAX5475 .....................................................±0.6mA
Continuous Power Dissipation (TA = +70°C)
6-Pin SOT23 (derate 9.1mW/°C above +70°C)............727mW
8-Pin SOT23 (derate 8.9mW/°C above +70°C)............714mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +2.7V to +5.25V, VH = VDD, VL = GND, TA = -40°C to +85°C, unless otherwise noted. Typical values are at VDD = +5.0V, TA
= +25°C, unless otherwise noted.) (Note 1)
PARAMETER
DC PERFORMANCE
Resolution
End-to-End Resistance
SYMBOL
CONDITIONS
N
MAX5471/MAX5474
MAX5472/MAX5475
MIN TYP MAX UNITS
32
Tap
37.5
50
62.5
kΩ
75
100 125
End-to-End Resistance
Temperature Coefficient
TCR
35
ppm/°C
Ratiometric Resistance
Temperature Coefficient
5
ppm/°C
Integral Nonlinearity
Differential Nonlinearity
INL
DNL
Variable-resistor mode (Note 2)
Voltage-divider mode (MAX5474/MAX5475)
(Note 3)
Variable-resistor mode (Note 2)
Voltage-divider mode (MAX5474/MAX5475)
(Note 3)
±0.5 ±1.0
LSB
±0.1 ±0.5
±0.5 ±1.0
LSB
±0.1 ±0.5
Full-Scale Error
Zero-Scale Error
Wiper Resistance
RW
DIGITAL INPUTS (CS, U/D, INC) (Note 5)
Input High Voltage
VIH
Input Low Voltage
VIL
Input Current
IIN
DYNAMIC CHARACTERISTICS
Wiper -3dB Bandwidth (Note 6)
MAX5474/MAX5475
MAX5474/MAX5475
MAX5474/MAX5475 (Note 4)
VDD < 3.6V
VDD ≥ 3.6V
VDD < 3.6V
VDD ≥ 3.6V
MAX5471/MAX5474
MAX5472/MAX5475
-0.5
LSB
+0.5 LSB
600 1200
Ω
0.7 x VDD
V
2.4
0.3 x VDD
V
0.8
±0.1
±1
µA
400
kHz
200
2 _______________________________________________________________________________________