WM8501 Просмотр технического описания (PDF) - Wolfson Microelectronics plc

Номер в каталоге

Компоненты Описание

производитель

WM8501

24-bit 192kHz Stereo DAC with 1.7Vrms Line Driver

Wolfson Microelectronics plc 

Production Data

WM8501

POWER UP/DOWN SEQUENCE

POWER UP/DOWN SEQUENCE

For click free operation, the WM8501 should be powered up and down in a specific sequence.

Power-up:

1. Power up AVDD and DVDD and wait to settle

2. Turn on clocks and data (MCLK, BCLK, LRCLK, SDATA)

3. Switch ENABLE pin from low to high

Power-down:

1. Switch Enable from high to low

2. Remove clocks and data

3. Power down AVDD and DVDD

RECOMMENDED ANALOGUE LOW PASS FILTER









Figure 18 Recommended 1st Order Low Pass Filter

Note: Capacitors should be COG dielectric.

An external single pole RC filter is recommended (see Figure 18) if the device is driving a

wideband amplifier. However the WM8501 does contain an internal low pass filter which should be

adequate in most applications.

w

PD, Rev 4.3, February 2013

17

Share Link: