Description
The MANO9600 is a rolling shutter CMOS image sensor with a resolution of 3840 x 2500 pixels.
The high sensitivity 2.4 μm x 2.4 μm pixels supports correlated double sampling readout reducing noise and increasing dynamic range.
A high level of programmability using a four wire serial peripheral interface enables the user to read out specific regions of interest.
Higher frame rates are achieved with region of interest or sub−sampled readout modes. The sensor has built−in features for bias control and power supply regulation.
The sensor has on−chip programmable gain amplifiers and 10−bit A/D converters. The integration time and gain parameters can be reconfigured without any visible image artifact. Optionally the on−chip automatic exposure control loop (AEC) controls these parameters dynamically. The image’s black level is either calibrated automatically or can be adjusted by adding a user programmable offset.

FEATUREs
• 9.6 MegaPixel Resolution in 3840 × 2500 Format
• 2.4 μm × 2.4 μm Square Pixels (Shared 4T Pixel Architecture)
• 2/3 inch Optical Format
• Monochrome (SM) Version
• 20 Frames per Second (fps) at Full Resolution
• 200 mW / 500 mW Power Consumption at 5 fps / 20 fps
• Four Low−Voltage Differential Signaling (LVDS) High Speed Serial
   Outputs or One 10−bit CMOS Output
• On-chip 10-bit Analog-to-Digital Converter (ADC)
• Windowing to Attain Higher Frame Rate
• Rolling Shutter
• On-chip Fixed Pattern Noise (FPN) Correction
• Serial Peripheral Interface (SPI)
• Automatic Exposure Control (AEC)
• Phase Locked Loop (PLL)
• High Dynamic Range (HDR)
• Dual Power Supply (1.8 V and 3.3 V)
• 0°C to 70°C Operational Temperature Range
• 52-pin LCC
• 500 mW Power Dissipation (LVDS)
• 200 mW Power Dissipation (CMOS)
• These Devices are Pb−Free and are RoHS Compliant

APPLICATIONs
• Biometrics (Fingerprinting)
• Machine Vision
• Inspection
• Microscopy