■ OVERVIEW
MB91220/S series is a line of single-chip microcontrollers based on a 32-bit high-performance RISC CPU and integrating a variety of I/O resources for embedded control applications.
The MB91220/S series is designed to be best suited for embedded applications which require high-speed and high-performance processing power in the CPU, such as DVD players, printers, TV sets, and the PDP control.The MB91220/S series is a line of CPUs in the FR60Lite implemented by FR* family.

■ FEATURES
• FR60Lite CPU
   • 32-bit RISC, load/store architecture, 5-stage pipeline
   • Maximum operating frequency : 32 MHz (Source oscillation is 4 MHz with x8 multiplier-PLL clock multiplier system)
   • 16-bit fixed-length instructions (basic instructions)
   • Instruction execution speed : 1 instruction per cycle
   • Instruction set optimized for embedded application : Memory-to-memory transfer, bit manipulation, barrel shift instructions etc.
   • Instructions supported by C language : Function entry/exit instructions, multiple-register load/store instructions.
   • Register interlock function : Easier assembler coding enabled
   • Built-in multiplier supported at the instruction level
                              Signed 32-bit multiplication : 5 cycles
                              Signed 16-bit multiplication : 3 cycles
   • Interrupt (PC/PS save) : 6 cycles (16 priority levels)
   • Harvard architecture allowing program access and data access to be executed simultaneously.
   • Instruction set compatible with FR family
  
• Internal Peripheral Functions
   • Internal ROM size & ROM type
      Flash Memory : 512 Kbytes (MB91F223/S)
   • Internal RAM size : 16 Kbytes (MB91F223/S) / 64 Kbytes (MB91V220)
   • General-purpose ports : up to 120 ports (including 4 input-only ports)
   • 8/10-bit A/D converter (Sequential comparison type)
      8/10-bit resolution : 24 channels
      Conversion time : 3 µs (16/32 MHz)
      Set the PLL multiplier and the division ratio of peripheral circuit clocks so that the above conversion time is achieved.
      32 MHz : Source oscillation (4 MHz) with ×8 multiplier, divided by 1
      16 MHz : Source oscillation with ×8 multiplier, divided by 2
   • D/A converter (R-2R type)
      8-bit resolution : 2 channels
   • External interrupt : 8 channels
   • Bit search module (for REALOS)
   • LIN-UART (full duplex double buffer type) : 4 channels
      Synchronous/asynchronous clock operations selectable
      Sync-break detection
      Dedicated built-in baud-rate generator
   • I2C Bus interface* : 2 channels
   • Stepping motor controller (SMC) : 4 channels
      10-bit PWM with 4 high-current outputs for each channel
   • 8/16-bit PPG timer : 16 channels
   • 16-bit reload timer : 3 channels
   • 16-bit free-run timer : 2 channels (ICU/OCU linkage)
   • 16-bit pulse width counter : 1 channel
   • Input capture : 4 channels (free-run timers ch.0 and ch.1). ch.0 linked to PWC
   • Output compare : 2 channels (free-run timer ch.0 )
   • LCD controller : SEG0 to SEG31/COM0 to COM3 (shared with port)
   • 16-bit timebase/watch dog timer

  
   • Sound generator : 3 channels
   • Real-time clock
   • 32 kHz sub clock (not supported in devices with an S suffix in the part number)
   • C-CAN : 2 channels
   • Low power consumption modes : sleep mode, stop mode, watch mode
   • Package : LQFP-144 (FPT-144P-M08)
   • CMOS technology : 0.35 µm
   • Power supply voltage : 5 V (Internal logic : 3.3 V, I/O : 5.0 V (step-down circuit used))