OVERVIEW
The CL-PS7111 is designed for ultra-low-power applications such as organizers/PDAs, two-way pagers, smart phones, and hand-held internet appliances. The core-logic functionality of the device is built around an ARM710a microprocessor with 8 Kbytes of four-way set-associative unified cache.
FEATURES
■ Ultra low power
— Designed for applications that require long battery life while using standard AA/AAA batteries
— Average 45 mW/66 mW in normal operation (2.7 V/3.3 V, 13 MHz/18.432 MHz)
— Average 15 mW in idle mode (clock to the CPU stopped, everything else running)
— Average 15 µA in standby mode (realtime clock on, everything else stopped)
■ Performance matching 33-MHz Intel ’486-based PC
— 15 Vax™-MIPS (Dhrystone) at 18 MHz
■ ARM710a microprocessor
— ARM7 CPU
— 8 Kbytes of four-way set-associative cache
— MMU with 64-entry TLB (transition look-aside buffer)
■ DRAM controller
— Supports both 16- and 32-bit-wide DRAMs
■ ROM/SRAM/flash memory control
— Decodes 4, 5, or 6 separate memory segments of 256 Mbytes
— Each segment can be configured as 8, 16, or 32 bits wide and support page-mode access — Programmable access time for conventional SRAM/ROM/flash memory
■ Support for up to two ultra-low-power CL-PS6700 PC Card controllers
■ 2 Kbytes of on-chip SRAM for fast program execution
■ On-chip boot ROM
■ Two synchronous serial interfaces
— Supports SPI1 or Microwire2-compatible
— Audio codec
■ 27-bit general-purpose I/O
— Three 8-bit and one 3-bit GPIO port
— Supports scanning keyboard matrix
(Continue ...)