GENERAL DESCRIPTION
The MX26LV800T/B is a 8-mega bit high speed Flash memory organized as 1M bytes of 8 bits or 512K words of 16 bits. MXICs high speed Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX26LV800T/B is packaged in 48-pin TSOP, and 48-ball CSP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.

FEATURES
• Extended single - supply voltage range 3.0V to 3.6V
• 1,048,576 x 8/524,288 x 16 switchable
• Single power supply operation
   - 3.0V only operation for read, erase and program
   operation
• Fast access time: 55/70ns
• Low power consumption
   - 30mA maximum active current
   - 30uA typical standby current
• Command register architecture
   - Byte/word Programming (55us/70us typical)
   - Sector Erase (Sector structure 16K-Bytex1,
   8K-Bytex2, 32K-Bytex1, and 64K-Byte x15)
• Auto Erase (chip & sector) and Auto Program
   - Automatically erase any combination of sectors with
   Erase verify capability.
   - Automatically program and verify data at specified
   address
• Status Reply
   - Data# polling & Toggle bit for detection of program
   and erase operation completion.
• Ready/Busy# pin (RY/BY#)
   - Provides a hardware method of detecting program or
   erase operation completion.
• 2,000 minimum erase/program cycles
• Latch-up protected to 100mA from -1V to VCC+1V
• Boot Sector Architecture
   - T = Top Boot Sector
   - B = Bottom Boot Sector
• Package type:
   - 48-pin TSOP
   - 48-ball CSP
• Compatibility with JEDEC standard
   - Pinout and software compatible with single-power
   supply Flash
• 20 years data retention