GENERAL DESCRIPTION
The Am29LV116D is a 16 Mbit, 3.0 Volt-only Flash memory organized as 2,097,152 bytes. The device is offered in a 40-pin TSOP package. The byte-wide (x8) data appears on DQ7–DQ0. All read, program, and erase operations are accomplished using only a single power supply. The device can also be programmed in standard EPROM programmers.

DISTINCTIVE CHARACTERISTICS
• Single power supply operation
   — 2.7 to 3.6 volt read and write operations for battery-powered applications
• Manufactured on 0.23 µm process technology
   — Compatible with and replaces Am29LV116B device
• High performance
   — Access times as fast as 70 ns
• Ultra low power consumption (typical values at 5 MHz)
   — 200 nA Automatic Sleep mode current
   — 200 nA standby mode current
   — 9 mA read current
   — 15 mA program/erase current
• Flexible sector architecture
   — One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and thirty-one 64 Kbyte sectors
   — Supports full chip erase
   — Sector Protection features:
      A hardware method of locking a sector to prevent
      any program or erase operations within that sector
      Sectors can be locked in-system or via
      programming equipment
      Temporary Sector Unprotect feature allows code
      changes in previously locked sectors
• Unlock Bypass Program Command
   — Reduces overall programming time when issuing multiple program command sequences n Top or bottom boot block configurations available
• Embedded Algorithms
   — Embedded Erase algorithm automatically preprograms and erases the entire chip or any combination of designated sectors
   — Embedded Program algorithm automatically writes and verifies data at specified addresses
• Minimum 1,000,000 write cycle guarantee per sector
• 20-year data retention at 125°C
   — Reliable operation for the life of the system
• Package option
   — 40-pin TSOP
• CFI (Common Flash Interface) compliant
   — Provides device-specific information to the system, allowing host software to easily reconfigure for different Flash devices
• Compatibility with JEDEC standards
   — Pinout and software compatible with singlepower supply Flash
   — Superior inadvertent write protection
• Data# Polling and toggle bits
   — Provides a software method of detecting program or erase operation completion
• Ready/Busy# pin (RY/BY#)
   — Provides a hardware method of detecting program or erase cycle completion
• Erase Suspend/Erase Resume
   — Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation
• Hardware reset pin (RESET#)
   — Hardware method to reset the device to reading array data