부품명
5241
Other PDF
no available.
PDF
page
16 Pages
File Size
104.9 kB
제조사
Catalyst Semiconductor => Onsemi
5241 데이터시트 - Catalyst Semiconductor => Onsemi
Catalyst Semiconductor => Onsemi
DESCRIPTION
The CAT5241 is four Digitally Programmable Potentiometers (DPPs™) integrated with control logic and 16 bytes of NVRAM memory. Each DPP consists of a series of 63 resistive elements connected between two externally accessible end points. The tap points between each resistive element are connected to the wiper outputs with CMOS switches.
FEATURES
■ Four linear-taper digitally programmable potentiometers
■ 64 resistor taps per potentiometer
■ End to end resistance 2.5kΩ, 10kΩ, 50kΩ or 100kΩ
■ Potentiometer control and memory access via 2-wire interface (I2C like)
■ Low wiper resistance, typically 80Ω
■ Nonvolatile memory storage for up to four wiper settings for each potentiometer
■ Automatic recall of saved wiper settings at power up
■ 2.5 to 6.0 volt operation
■ Standby current less than 1µA
■ 1,000,000 nonvolatile WRITE cycles
■ 100 year nonvolatile memory data retention
■ 20-lead SOIC and TSSOP packages
■ Industrial temperature range
부품명
상세내역
보기
제조사
Dual Digitally Programmable Potentiometers (DPP™) with 64 Taps and 2-wire Interface
Catalyst Semiconductor => Onsemi
Quad Digitally Programmable Potentiometers (DPP™)with 64 Taps and 2-wire nterface
Catalyst Semiconductor => Onsemi
Dual Digitally Programmable Potentiometers (DPP™) with 256 Taps and 2-wire Interface
Catalyst Semiconductor => Onsemi
Dual Digitally Programmable Potentiometers (DPP™) with 256 Taps and 2-wire Interface
Catalyst Semiconductor => Onsemi
Dual Digitally Programmable Potentiometers (DPP™) with 256 Taps and 2-wire Interface ( Rev : V2 )
ON Semiconductor
Dual Digitally Programmable Potentiometers (DPP™) with 256 Taps and 2-wire Interface ( Rev : 2007 )
Catalyst Semiconductor => Onsemi
Share Link: 