20 MHz Dual Channel Function / Arbitrary Generator

The 4047B Dual Channel Function/Arbitrary Waveform Generator is capable of generating stable and precise sine, square, triangle, pulse, and arbitrary waveforms. CH1 and CH2 outputs are fully independent with individual on/off buttons and can both be varied from 0 to 10 Vpp into 50 ohms (up to 20 Vpp into open circuit). The generator provides linear and logarithmic sweep capabilities, AM/FM/PM/FSK/PWM modulation, and a continuously variable DC offset to inject signals directly into circuits at the correct bias level. Separate output amplitude and DC offset amplifiers let you set a large DC offset (e.g. ± 4.99 V) with a small amplitude output signal (e.g. 10 mV). 

FEATUREs & Benefits
◾ Dua~l-channel operation with each channel
   providing the rated amplitude (10 Vpp) over
   the entire frequency range
◾ Sine and square waveforms up to 20 MHz
◾ True point-by-point 14-bit, 125 MSa/s, 16-kpt
   arbitrary waveform generator
◾ Bright color display with waveform preview
◾ Synchronize the phase of both channels with
   the push of a button
◾ Linear and logarithmic sweep
◾ AM, FM, PM, FSK, and PWM internal and
   external modulation capabilities
◾ Gate and burst mode
◾ Independent output and DC offset amplifiers
   allow for small amplitude output signals with
   large DC offsets
◾ Low-jitter square wave generation for
   simulating reliable clock signals, generating
   triggers, or validating serial data buses
◾ USB interface
◾ SCPI-compliant command set
◾ Internal/external triggering
◾ Built-in counter
◾ Short circuit protection for resistive and
   capacitive loads on outputs and overvoltage
   protection on inputs

APPLICATIONs
   This generator is suitable for a wide range of
   applications including electronic design,
   sensor simulation, functional test, or serial
   data bus validation.