2ED21834S06J 데이터 시트보기 (PDF) - Infineon Technologies
부품명
상세내역
제조사
2ED21834S06J Datasheet PDF : 26 Pages
| |||
2ED2183 (4) S06F (J)
650 V half-bridge gate driver with integrated bootstrap diode
4.3
Static electrical characteristics
(VCC– COM) = (VB – VS) = 15 V, VSS = COM and TA = 25 °C unless otherwise specified. The VIL, VIH and IIN parameters are
referenced to Vss / COM and are applicable to the respective input leads: HIN and LIN. The VO and IO parameters
are referenced to VS / COM and are applicable to the respective output leads HO or LO. The VCCUV parameters are
referenced to COM. The VBSUV parameters are referenced to VS.
Table 5
Static electrical characteristics
Symbol
Definition
Min. Typ. Max. Units Test Conditions
VBSUV+
VBS supply undervoltage positive going
threshold
7.6 8.2
8.9
VBSUV- VBS supply undervoltage negative going
threshold
VBSUVHY VBS supply undervoltage hysteresis
6.7 7.2
8.1
1.0
—
V
VCCUV+
VCC supply undervoltage positive going
threshold
8.4 9.1
9.8
VCCUV-
VCC supply undervoltage negative going
threshold
7.5 8.2
8.9
VCCUVHY VCC supply undervoltage hysteresis
0.9
—
ILK High-side floating well offset supply leakage —
1
12.5
VB = VS = 650 V
IQBS Quiescent VBS supply current
—
170
—
uA All inputs are in
IQCC Quiescent VCC supply current
—
550
—
the off state
VOH High level output voltage drop, Vcc- VLO , VB- VHO —
0.05
0.2
V
VOL Low level output voltage drop, VO
— 0.02 0.1
IO = 20 mA
Io+mean Mean output current from 3 V to 6 V
1.65 2.2
CL = 22 nF
Io+ Peak output current turn-on1
Io-mean Mean output current from 12 V to 9 V
2.5
—
VO = 0 V
PW ≤ 10 µs
A
1.65 2.2
CL = 22 nF
Io- Peak output current turn-off1
2.5
VO = 15 V
PW ≤ 10 µs
VIH Logic “1” input voltage
VIL Logic “0” input voltage
1.7 2.1
2.4
0.7 0.9
1.1
V Vcc=10 V to 20 V
IIN+ Input bias current (Output = High)
IIN- Input bias current (Output = Low)
—
25
50
µA
—
—
10
VIN = 5 V
VIN = 0 V
Bootstrap diode forward voltage between Vcc
VFBSD and VB
—
1
1.2
V
IF=0.3 mA
Bootstrap diode forward current between Vcc
IFBSD and VB
55 100 145 mA
VCC-VB=4 V
RBSD Bootstrap diode resistance
15
25
40
Ω
VF1=4V,VF2=5 V
Allowable Negative VS pin voltage for IN
VS Signal propagation to HO
—
-11
-10
V
Vcc=15 V
1 Not subjected to production test, verified by characterization.
Datasheet
www.infineon.com/soi
8 of 26
V 2.21
2020-07-07
Share Link: 