RP10-2405DEW 데이터 시트보기 (PDF) - RECOM Electronic GmbH

부품명

상세내역

제조사

RP10-2405DEW

POWERLINE DC/DC-Converter

RECOM Electronic GmbH 

POWERLINE

DC/DC-Converter

RP10-S_DEW

Series

Specifications (typical at nominal input and 25°C unless otherwise noted)

Vibration

Relative Humidity

Case Material

Base Material

Potting Material

Conducted Emissions (see Note 10)

Radiated Emissions

ESD

Radiated Immunity

Fast Transient

Surge

Conducted Immunity

EN55022

EN55022

EN61000-4-2

EN61000-4-3

EN61000-4-4

EN61000-4-5

EN61000-4-6

Weight

Dimensions

MTBF (see Note 2)

10-55Hz, 2G, 30 Min. along X, Y and Z

5% to 95% RH

Nickel plated copper

Non-conductive black plastic

Epoxy (UL94-V0)

Level A

Level A

Perf. Criteria 2

Perf. Criteria 2

Perf. Criteria 2

Perf. Criteria 2

Perf. Criteria 2

27g

50.8 x 25.4 x 10.2mm

1976 x 103 hours

Notes :

1. The RP10 (W) series required a minimum 10% loading on the output to maintain specified regulation.

Operation under no-load condition will not damage these devices, however they may not meet all listedspecification.

2. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment).

3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.

4. Maximum value at nominal input voltage and full load of standard type.

5. Typical value at nominal input voltage and full load.

6. Test by minimum Vin and constant resistor load.

7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.

Positive logic ON/OFF is marked with suffix-P (eg. RP10-2405SEW/P)

Negative logic ON/OFF is marked with suffix-N (eg. RP10-2405SEW/N).

If no suffix is specified, the control pin will be omitted.

8. Heat sink is optional and P/N: 7G-0020A.

9. M2 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard version.

10. See application notes for EMI-filtering.

www.recom-international.com

July-2006

227

Share Link: