LVD
SCSI
Interface
Wide SCSI
Controller
2048 Byte
Data
Buffer
32 Byte
Command
Buffer
8KB SRAM
Bus
I/F
R3000 CPU
Unit
8KB SRAM
GPIO
(x3)
Serial
ICE
UART
I2C
Serial I/F
(x3)
External
Memory
I/F
Timer
VSC205 Block Diagram
INT
Cont.
monitoring and management applications such as
Vitesse VSC055/050 Backplane Controllers.
The VSC205 requires off chip memory for firmware
code storage. Most applications will use flash
memory devices for non-volatile storage. Static
RAM may be added for higher performance
applications. The VSC205 has three external chip
selects each with a one-megabyte address range.
Two RS-232 serial ports provide assist firmware
debug. One port is dedicated to in circuit emulation
for the embedded processor. The second port
implements a XMODEM connection for additional
debug and firmware download.
Firmware
downloads are also supported via the SCSI bus.
Software
The software designed to execute on the VSC205
determines the characteristics of the overall
enclosure management solution. Most enclosure
management applications will be unique to a
customer's individual product. The VSC205
firmware architecture uses a Personality Module with
captures the unique functionality required by a
particular application. Vitesse provides a Software
Development Kit (SDK) to customers to assist their
development of their Personality Module.
The SDK includes software to implement an ESI and
a parallel SCSI transport for SAF-TE or SES
diagnostic environments. In addition, the SDK also
includes a System Services module with provides
APIs to the peripheral functionality (interrupts, timers
etc.) in the VSC205.
The VSC205 shares a similar hardware and
firmware architecture as Vitesse SSC200 and
SSC100. This allows system designers to leverage
enclosure management strategies and
implementations across parallel SCSI, ESI and
dedicated port FC-AL storage solutions.
System Services
Personality Module
Diagnostic Interface
Transport
SDK Firmware Block Diagram
For More Information:
www.vitesse.com
email: prodinfo@vitesse.com
TEL: 1-800-VITESSE FAX: 805/987-5896
Vitesse Semiconductor Corporation reserves the right to make
changes in its products, specifications or other information at any
time without prior notice. Therefore the reader is cautioned to
confirm that this datasheet is current prior to placing any orders.
The company assumes no responsibility for any circuitry
described other than circuitry entirely embodied in a Vitesse
product.
(Version 1.0)
© 2000 Vitesse Semiconductor Corporation, All Rights Reserved.